Switches

Relay - SPDT, Leslie 147 Retrofit
Reliable replacement relay for the Leslie 147. The small size makes this high quality relay easy to retrofit in the 147. Its performance exceeds the original relays used in the Leslie 147 with its very low switching noise and high ratings on both the contacts and the coil. Features:
  • 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts
  • Coil EMC suppression
  • Cadmium Free contact material
$32.50
Switch - for Run Circuit in Hammond Organ
Switch for run circuit in Hammond Organ. Electrical Rating: 16 A - 125 V 8 A - 250 V Dimensions: Mounting Diameter: ½" Bushing Length: 0.425" Length: 1.89" Width: 0.82" Depth: 0.69"
$29.95
On Backorder
Switch - Alpha, Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT, 2 Position, On-On. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.64
Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"
$1.79
Nut - Large Dress Nut, Carling, 15/32-32UNS
Colors Available:
Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
$1.29
Switch - Carling, Toggle, DPST, On-Off, Tabs, 15A
Carling, DPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.
$7.45
Footswitch - 3PDT, with built-in LED Ring
Colors Available:
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Starting at $7.95
Footswitch - 3PDT, DeMont, Latching, Smooth-Click
Premium quality latching 3PDT switches from DeMont / Guyatone. These made in Japan switches are designed specifically for audio signals. The Demont 3PDT has ultra-smooth switching action and has a very low actuation force. It uses gold plated solder cup terminals for solid connections with a professional look. Mounting hardware included.
$18.95
Relay - Panasonic, DPDT, 5V, Single Coil, Latching
High quality latching relays from the Panasonic TQ series. These 5 volt relays are commonly used in pedals for true bypass switching. Relay switching can allow for a variety of options on pedal builds. Different footswitch modes can be obtained using the same momentary footswitch. Stereo switching using a standard footswitch is another possible option.
Features:
  • Compact low profile size
  • Standard DIL spacing for easy PCB use and breadboard compatibility
  • Latching
  • Single Coil
  • 5V Coil Voltage

For a non-latching version, please see P-RP-TQ2-5V.
$3.65
Footswitch - 3PDT, Blue, PC Mount, latching-type
3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.
$5.50
Switch - Les Paul 3 Position, US Retro-Fit, silver base
Cap Colors Available:
LP/PRS style 3 position pickup selector switch. M3.5 x 0.60 switch cap threading.
Starting at $7.95
Footswitch - ST Professional, SPST, Momentary, Solder Lugs
Heavy duty SPST Off-(On) momentary switch made in Italy by ST Professional. Rated for 2A at 240V, these switches can be used in a wide range of applications. The body is made of PBT that is riveted to the bushing plate for a sturdy construction. The actuation force is lighter than similar Carling momentary switches and provides tactile and audible feedback so the switching action is apparent to the user. This version features standard solder lugs.
$7.27
Switch Tip - Fender®, Stratocaster
Colors Available:
Original Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.
$4.25
package of 2
Switch - Rotary, 2 Poles, 6 Positions, ¼" Shaft
.3A 125VAC. 2 pole, 6 position, solid 1/4" shaft. DP6T rotary switch.
Starting at $2.20
Insulation - GC Electronics, fibroid, "fish paper"
Vulcanized Cellulose Fiber for all electrical insulation. Gray insulating paper. .010" thick. used in switches, under terminals, in transformers, etc .where mechanical strength is required. Its qualities of toughness, flexibility, and edge-tearing resistance combined with high dielectric strength and ready absorption of insulating varnish have led to its predominant use as an improved motor slot call insulation. Dielectric strength 3000 volts. 10" wide roll contains 240 sq. inches.
$6.25
Potentiometer - GØRVA, Linear, 16mm, Solder Lug, Solid Shaft
High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Linear taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
Switch - Carling, Toggle, DPDT, On-On, Solder Lugs
Carling, DPDT 2 position toggle with solder lugs (6A, 125V). 0.687" toggle length. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$9.65
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • On-On Three pole/double throw (3PDT)
$4.95
Switch - Toggle, DPST, On-Off, Chrome Tip
Toggle switch for Marshall amps, latching 2 position DPST, On-Off. 15A 250VAC rating. Used for Mains and Standby switch in Marshall 1959SLP, 1987X, 2245 and others. Mounting nuts (1 hex and 1 knurled) included. Main features:
  • Construction : Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength.
  • Rating : These switches are suitable for motor loads and power applications up to 15A 250VAC
  • UL, CSA and NF-VDE (EN 61058-1) approved

Note: On-Off switches may sometimes be referred to as On-None-Off.
$14.95