Switches

Replacement relay for Leslie model 147 amplifier, 115 VAC , SPDT. The contacts are rated at 10A.

Switch for run circuit in Hammond Organ. Electrical Rating: 16 A - 125 V 8 A - 250 V Dimensions: Mounting Diameter: ½" Bushing Length: 0.425" Length: 1.89" Width: 0.82" Depth: 0.69"

• Ratings:
  
  • IEC: 6.3 A / 250 VAC; 50 Hz
  • UL: 10 A / 250 VAC; 60 Hz
  • CSA: 8 A / 250 VAC; 60 Hz
• Mounting: Panel Mount from front side
• Fastening: Screw-on mounting
• Terminal: Solder
• Number of Stages: 3
• Lifetime: 300 operating cycles (without load)
• Degree of Protection: IP 40
• Allowable Operation Temp.: -40 °C to 85 °C
• Climatic Category: 25/85/21 acc.

Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side.

Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.

• Tip not included. See W-SC-W0X
• Black finish

The LEHLE MODULE SW is a true bypass switching unit with relay and an active pop suppression function controlled by an intelligent microcontroller circuit, thereby allowing the LEHLE MODULE SW to switch even faster than mechanical switches, noise-free and without wear.

Switchcraft Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.

• Tip not included. See W-SC-W0X (Note: Two threads will show beneath the switch cap.)
• Nickel Finish

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output.

One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 5 position super switch with knob and mounting hardware.

Switchcraft Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.

• Tip not included, see W-SC-W0X
• Nickel Finish

Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.

Switchcraft Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.

Marshall toggle switch, latching 2 position DPST, On-Off. 15A 250VAC rating. Used for Mains and Standby switch in Marshall 1959SLP, 1987X, 2245 and others. See Marshall nut S-HM300N if necessary. Nut sold separately. Note: On-Off switches may sometimes be referred to as On-None-Off.

Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR, Cry Baby, and other effects pedals.

The LEHLE SWITCH BTN is a momentary foot switch. It is housed in an M12 threaded enclosure made of stainless steel. Thanks to the gold plated contact material its life span is at least one million switching cycles electrically and mechanically. Hardware included.

Rotary impedance selector, 4/8/16. Body screws onto chassis hole.

Includes: 3 pole, 3 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G) (See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)

Includes: 3 pole, 4 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600 series transformers all provide secondary impedances of 4, 8, or 16 ohms but due to the unique wiring of the secondary, the impedance cannot be changed without rewiring... Until now. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary.

Original Gretsch nickel switch knobs. Made in USA. Gretsch part number: 922-1042-000

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.

Carling, DPDT footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.

Solid 6mm Shaft, 6A 125VAC, 0.39" bushing diameter. 1 pole, 3 position. Break before make (non-shorting) Adjustable stop with slotted spring pin (3 position or 2 position).

Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.