Synth & Eurorack Parts / DIY

Our Synth & Eurorack Parts / DIY category is a curated list of items that are commonly found in synth/eurorack projects. The items and filters here do not represent our full lineup of parts. If you don't see what you are looking for, check out our main categories or send us a suggestion and we'll look into adding it.
Capacitor - 500V, Ceramic Disc, ± 10%
Radial ceramic capacitor.
  • Voltage rating: 500VDC
  • Tolerance: ± 10%
Starting at $0.25
Transistor - 2N4123, Silicon, TO-92 case, NPN
The 2N4123 is a general purpose silicon NPN transistor in a TO-92 case. The 2N4123 is primarily intended for general purpose amplification. It is a popular choice for silicon fuzz pedals due to its low hFE specifications.
$0.45
3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, PC Mount
PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
Heat Shrink - Assorted Diameters, 6" Long, 24 Pieces
2 to 1 heat shrink tubing variety pack. This pack includes six different diameters with four pieces of each size. Each piece is six inches in length. Features:
  • Resistant to common fluids and solvents
  • UL and CSA listed
  • UV resistant
  • Meets DEF. STAN 59.97
  • Meets UL 224, 125°C and CSA C22.2 No. 198.1
  • Meets MIL-DTL-23053/5 Class 2 & 3
  • Flame retardant (Does not include transparent)
  • Seals and protects cable splices and terminations.
  • Thin wall tubing
$5.45
Patch Cables - 3.5mm, Mono
Colors Available:
Low cost, high quality 3.5mm patch cables in a variety of lengths and colors. The cables are super flexible, have a great droop, and are shipped coiled so no permanent kinks are formed. With the large selection of lengths and colors, these cables are the perfect choice for any sized system.
Starting at $1.11
Save 20%
Originally: $1.39
Partially Out of Stock
CMOS - CD40106, Hex Schmitt-Trigger Inverters, 14-Pin DIP
The CD40106B device consists of six Schmitt-Trigger inputs. Each circuit functions as an inverter with Schmitt-Trigger input. The trigger switches at different points for positive- and negative-going signals. The difference between the positive-going voltage (VP) and the negative-going voltages (VN) is defined as hysteresis voltage (VH). Features:
  • Schmitt-Trigger Inputs
  • Hysteresis Voltage (Typical):
    • 0.9 V at VDD = 5 V
    • 2.3 V at VDD = 10 V
    • 3.5 V at VDD = 15 V
  • Noise Immunity Greater Than 50%
  • No Limit On Input Rise and Fall Times
  • Standardized, Symmetrical Output Characteristics
  • For Quiescent Current at 20 V
  • Maximum Input Current Of 1 µA at 18 V Over Full Package Temperature Range: 100 nA at 18 V and 25°C
  • Low VDD and VSS Current During Slow Input Ramp
  • 5-V, 10-V, and 15-V Parametric Ratings
$0.75
Trimmer - Bourns, 3362P, Single Turn, Top Adjust, PCB Mount
High-quality Bourns 3362P trimpots. These single-turn cermet trimmers can be found in countless guitar pedals and synthesizer modules. Sealed trimmers are built with an o-ring seal to prevent entrance of moisture and serve as a mechanical restraint to prevent unwanted wiper movement. ±10% tolerance.
Starting at $1.25
Op-Amp - TL074, Quad, Low-Noise, JFET Input, 14-Pin DIP
Low noise JFET quad operational amplifier. Incorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. Features high slew rates, low input bias and offset currents, and low offset voltage temperature coefficients. Features:
  • Wide common-mode and differential voltage range
  • Low input bias and offset current
  • Low noise en = 15 nV/HZ
  • Output short-circuit protection
  • High input impedance JFET input stage
  • Low harmonic distortion: 0.01%
  • Internal frequency compensation
  • Latch up free operation
  • High slew rate: 16 V/us (typical)
$1.32
Transistor - 2N1711, Silicon, TO-39 case, NPN
The 2N1711 is a silicon planar epitaxial NPN transistor in a TO-39 metal case. It is intended for use in high performance amplifiers, oscillators and switching circuits. The 2N1711 is a great choice for amplifiers where low noise is an important factor.
$1.00
Integrated Circuit - PT2399, Echo / Delay
PT2399 echo/delay chip used in many DIY and commercial pedals. The PT2399 is in a DIP 16 package. Minimal external components are required for use and delay time is set with resistance.
$1.70
Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw

Davies 1913 (Large)
  • Height: 0.625 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw
$2.75
Knob - Aluminum, Set Screw, Short Line, 0.495" Diameter
Colors Available:
Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
$1.85
Trimmer - BI Technologies, Sealed, Cermet , Top Adjust, 10kΩ
High-quality BI Technologies Model 82 trimpots. These single-turn cermet trimmers are sealed ensuring a long life. They feature long leads (0.62”) making them a great choice for point to point builds in addition to PCB mounting. The simplistic design also looks great in vintage style builds.
$1.79
Transistor - 2N6027 Programmable Unijunction
2N6027 programmable unijunction transistor often referred to as a PUT. The 2n6027 can be found in many tremolo effects pedal projects.
$1.45
Op-Amp - LF356, Single, High Slew Rate, 8-Pin DIP
LF356 single op amp in an 8-pin DIP package. The LFx5x devices are the first monolithic JFET input operational amplifiers to incorporate well-matched, high-voltage JFETs on the same chip with standard bipolar transistors (BI-FET™ Technology). These amplifiers feature low input bias and offset currents/low offset voltage and offset voltage drift, coupled with offset adjust, which does not degrade drift or common-mode rejection.
$0.95
Wire - Weico, 24AWG Stranded, Top Coat Pre-Tinned, 300V, 50 feet
Colors Available:
High quality 24AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required. This wire is ready to go as soon as it is cut and stripped making assembly that much easier. Rated at 300V and offered in a variety of colors, this wire is a great option for a variety of different projects.
$8.95
CMOS - CD4046, Micropower Phase-Locked Loop, 16-Pin DIP
CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input. A 5.2-V zener diode is provided for supply regulation if necessary. Features:
  • Very low power consumption: 70 µW (typ.) at VCO fo = 10 kHz, VDD = 5 V
  • Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k
  • Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V
  • Choice of two phase comparators:
    • Exclusive-OR network (I)
    • Edge-controlled memory network with phase-pulse output for lock indication (II)
  • High VCO linearity: <1% (typ.) at VDD = 10 V
  • VCO inhibit control for ON-OFF keying and ultra-low standby power consumption
  • Source-follower output of VCO control input (Demod.
$1.29
Transistor - AS3046D, Array of 5, Matched Pair, SOIC-14, NPN
The AS3046 is Alfa’s version of the CA3046 IC in an SOIC package. The AS3046D consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching. The AS3046D is available in a 14-pin SOIC package. Features
  • Matched pair of npn transistors
  • VBE matched less than ±1 mV
  • 5 general purpose monolithic transistors
  • Wide operating current range

Applications
  • Filters
  • Custom designed differential amplifiers
  • Temperature compensated amplifiers
$3.95
On Backorder
Key Contacts - Korg, Rubber, for Keyboards
For N364 and X5, 5 are required. for N264, 2 are needed. May be cut. Sold individually. These are also used in the Kurzweil MK (MARK)-Series of electronic pianos.
Starting at $6.95
Knob - Rogan, PT Series, 3PS, Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in
  • Diameter: 0.73 in
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.75
Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
  • SPDT ( Single Pole/ Double Throw) On-On switch
  • 0.275" bushing length
  • 0.270” bat length
  • ¼" chassis hole diameter
  • Right angle, PC Mount terminals

Note: On-On switches may sometimes be referred to as On-None-On.
$3.85
Potentiometer - Alpha, Reverse Audio, Solid Shaft, Right Angle, 16mm
Reverse audio taper Alpha 16mm pots with a solid shaft and right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
$25.00
package of 100
Op-Amp - OP275, Dual, Bipolar/JFET, Audio, 8-Pin DIP
OP275 dual audio op amp in an 8-pin DIP package. The OP275 is the first amplifier to feature the Butler Amplifier front end. This new front end design combines both bipolar and JFET transistors to attain amplifiers with the accuracy and low noise performance of bipolar transistors, and the speed and sound quality of JFETs. Total Harmonic Distortion plus Noise equals that of previous audio amplifiers, but at much lower supply currents. A very low l/f corner of below 6 Hz maintains a flat noise density response. Whether noise is measured at either 30 Hz or 1 kHz, it is only 6 nVHz. The JFET portion of the input stage gives the OP275 its high slew rates to keep distortion low, even when large output swings are required, and the 22 V/µs slew rate of the OP275 is the fastest of any standard audio amplifier.
$4.50