Synth & Eurorack Parts / DIY

0.002uF ceramic disc capacitor rated for up to 1kV, ± 10% tolerance.

Radial ceramic capacitor.

• Voltage rating: 500VDC
• Tolerance: ± 10%

100 V ceramic disc capacitors. ± 10% tolerance.

Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.

Ceramic disc capacitor, 680 pF (.00068µF) rated for up to 50 V.
Non linear temperature coefficient of capacitance

High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.

High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.

Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.

• Small size, light weight and low cost
• Dissipation factor is small because the leads are directly welded to electrodes
• Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
• 100 volt rating
• Operating temperature range: -40°C to +85°C.
• Package of 5

Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.047µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C

Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C

High quality R82 Series box film capacitors from Kemet. These polyester film capacitors have 5mm lead spacing, a minimum voltage rating of 63VDC, and a tolerance of ±10% or better. The small size, high specifications, and radial mounting makes them an excellent choice for PCB builds of pedals, synthesizer, and other audio equipment. The R82 Series is constructed of metallized polyester film with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94V–0 requirements.

• Voltage rating: 63 VDC Minimum
• Lead Spacing: 5 mm
• Capacitance tolerance: ±10% or better
• Operating temperature range of -55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Self-healing

Genuine Dunlop replacement small knurled knob for MXR pedals. Push -on style knob designed for use with coarse knurled shafts.

Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.

• 0.354" bushing length
• 1/4" mounting hole diameter
• On-On Three pole/double throw (3PDT)

Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.

Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.

Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars.

• 0.354" bushing length
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• On-On

Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.

Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On

Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position On/Off/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• Solder lugs

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 2-Position On/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• PC mount pins