300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.

200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.

300mm x 16mm tagboard with a single row of 26 tags. Each connector features two lugs for easy wiring. This board can be used for stand alone projects or can be used to expand the P-HTAG-56. This board features four mounting holes.

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10

Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 8 lugs, first and eighth lug common.

Eyelets, bag of 10 (mounts in 1/8" hole).

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.

Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.

• .062" thick
• 3" x 15"