You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
S-TPTA7Soldering iron tip - Weller, screwdriver, for WTCPT, 700F
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP
  • PT Series Screwdriver Tip for TC201 Series Iron
  • Solid copper, plated with iron all over
  • Designed to provide maximum heat transfer from the heater to the tip
  • Tinned with lead-free solder
  • Use only genuine Weller tips
$4.95
$4.46
You save: 10%
Click to read more about this product.
S-TSP40LSoldering Iron - Weller, Marksman, 40 watts
  • Weller Consumer Soldering Irons with 3 LEDs
  • Three LED lights for limited application shadowing
  • Round Co-molded soft grip handle design for easy tip positioning
  • Triangular handle area for maximum tip control
  • Stainless steel heater construction
  • Excellent quality consumer iron
  • Input Voltage: 120
  • Power Consumption: 40 watts
  • Tip Temperature: 900ºF
  • Heating Element Type: Nichrome Wound
  • Fiberglass and ceramic insulated

$23.95
$21.56
You save: 10%
Click to read more about this product.
S-TWP35Soldering iron - Weller, WP35, controlled output
  • Input Voltage: 120
  • Power Consumption: 35 watts
  • Tip Temperature: 850ºF
  • Heating Element Type: Nichrome wound, fiberglass and ceramic insulated
  • Lightweight handle with cushion grip for ease of use and comfort
  • Comes with 1/8" screwdriver tip
  • Stand (S-TPH60) sold separately
  • Three wire grounded power cord for your safety
  • UL listed
Stand sold separately (S-TPH60)
$58.95
$53.06
You save: 10%
Click to read more about this product.
S-T7805Bulb solder-off - Weller
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning.
Begin by squeezing, then hold over the solder to be removed and release the bulb to allow the solder to be sucked into the bulb. This method of solder removal is very basic and inexpensive. The bulb takes up very little space in your tool kit. Made in Taiwan.
$16.95
$15.26
You save: 10%
Click to read more about this product.
S-TPTA8Soldering iron tip - Weller, screwdriver, for WTCPT, 800F
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP
  • PT Series Screwdriver Tip for TC201 Series Iron
  • Solid copper, plated with iron all over
  • Designed to provide maximum heat transfer from the heater to the tip
  • Tinned with lead-free solder
  • Use only genuine Weller tips
$4.95
$4.46
You save: 10%
Click to read more about this product.
S-T1095Heat gun - Weller, Ungar 1095
UNGAR brand Electric Industrial heat gun with dual temperature. Can be used for applying heat shrinking products, curing epoxy, softening adhesives, drying, molding plastics, heating liquids, etc.
  • Dual temperature settings
  • 3-way switch: Hi-Off-Low
  • 3-wire grounded power cord, 6 feet
  • Wattage: 1000W
  • Temperature Ranges: 1200F - 740F
$66.95
$60.26
You save: 10%
Click to read more about this product.
S-T1082Reflector - Weller, for heat gun 1095
Used for heat shrink tubing. Stainless steel construction. For use with Weller heat gun S-T1095.
Temperature range: 1200F - 790F
$8.50
$7.65
You save: 10%
Click to read more about this product.
S-TWSA350Bench top smoke absorber - Weller
Keep those fumes out of your face while soldering with this benchtop smoke absorber.
  • Removes flux fumes from soldering workbench
  • Great for workspaces using more active fluxes used with lead-free solder
  • Fumes are absorbed by the replaceable carbon-activated filter
  • Includes one replacement filter (S-TWSA350F)
  • Stand allows the smoke absorber to be adjusted to varying angles
  • Fan is quiet and will not add significant noise to the workspace
  • ESD safe
  • Air Flow Volume: 1370 l/min
  • Wattage: 20 watts
$71.95
$64.76
You save: 10%
Click to read more about this product.
S-TWES51Solder Station - Weller, WES51, analog
The Weller WES51 Analog Soldering Station, with included soldering pencil, stand, and sponge, is the perfect choice for a variety of soldering applications, including industrial manufacturing, rework, repairs, and more. The comfortable foam-grip pencil and variable temperature controls give you complete command of your work for precise results. Plus, with a non-burnable silicone rubber cord, ESD safety, and automatic shut-off technology, the WES51 is safe enough to use in a continuous production environment.
$129.95
$116.96
You save: 10%
Click to read more about this product.
S-TWTCPTSoldering station - Weller, WTCPT, controlled output
60 Watts, 120v Temperature Controlled Soldering Station
  • PU120T power unit, TC201T soldering pencil, PH1201ESD stand and sponge
  • A lighted rocker switch indicates on/off status
  • Quick disconnect plug for soldering iron allows fast iron change
  • Power unit features impact resistant plastic for durability
  • Comes with S-TPTA7 tip
  • ESD safe to protect sensitive components
  • UL listed
$189.95
$170.96
You save: 10%
Click to read more about this product.
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Tech Supplies