You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(25 pages)
S-B300Electronic Component Storage Box - large
This electronic component storage box works great for storing caps, pots, resistors and other electronic components. 10 different compartments, made of plastic, measures 8.25" x 4.25".
$10.95
Click to read more about this product.
S-B301Electronic Component Storage Box - small
This electronic component storage box works great for storing caps, pots, resistors and other electronic components. 8 different compartments, made of plastic, measures 5" x 3.375".
$6.25
Click to read more about this product.
S-T9000XSolder - Kester 44, 1 lb spool
Multiple Options Available
(60/40 Rosin Core) - ..031" or .050" Diameter, 1 lb Spool, contains lead alloy.
Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades.
An outstanding performance feature of this flux is the “instant-action” wetting behavior.
$31.95
Click to read more about this product.
S-T170MPliers - Xcelite, shearcutter, general purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc.
Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
$7.95
Click to read more about this product.
S-TBM4Bias Master™ - TAD, with 4 Octal Probes
BIASMASTER System BM4 Measures BIAS current of any 6L6GC, 6550, EL34, 6V6GT, 5881, KT66, KT88, KT90, KT100, KT120, 7027A etc. in your amp. Includes 4 octal probes (2x S-TBMA2) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current savely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result.
$195.00
Click to read more about this product.
S-T1715Staking Tool - for Eyelets and Turrets
Turret staking tool.
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$9.95
Click to read more about this product.
S-TST1Soldering iron tip - Weller, screwdriver 1/16", for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST1 - .062" / 1.58 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$4.25
Click to read more about this product.
S-TST3Soldering iron tip - Weller, screwdriver ⅛", for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST3 - .125" / 3.17 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$5.50
Click to read more about this product.
S-TST7Soldering iron tip - Weller, conical, for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST7 - .031" / 0.79 mm diameter Conical tip
  • Tinned with Lead Free alloy
$4.95
Click to read more about this product.
S-T806The Nibbler - cutter for square holes

Instructions



  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.

$6.95
Click to read more about this product.

Pages

(25 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Tech Supplies