You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(22 pages)
S-T170MPliers - Xcelite, shearcutter, general purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc.
Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
$7.95
Click to read more about this product.
S-T1715Staking Tool - for Eyelets and Turrets
Turret staking tool.
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$9.95
Click to read more about this product.
S-TST1Soldering iron tip - Weller, screwdriver 1/16", for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST1 - .062" / 1.58 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$4.25
Click to read more about this product.
S-TST3Soldering iron tip - Weller, screwdriver ⅛", for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST3 - .125" / 3.17 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$5.50
Click to read more about this product.
S-TST7Soldering iron tip - Weller, conical, for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST7 - .031" / 0.79 mm diameter Conical tip
  • Tinned with Lead Free alloy
$4.95
Click to read more about this product.
S-T806The Nibbler - cutter for square holes

Instructions



  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.

$6.95
Click to read more about this product.
S-W111Wire - 22 AWG, stranded with tin braid
For vintage reverb tank cables. 22 AWG, stranded with tin braid. Outer Diameter: 0.10".
105°C temperature rating, 600V. Sold per foot.
$0.95
Click to read more about this product.
S-CDN5S-6NDeoxIT® DN5 Spray - Caig, 5% solution
DeoxIT® DN5 Spray, 5% solution.
Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
$26.95
Click to read more about this product.
S-TGTSC1String Cutters - CruzTOOLS GrooveTech, for guitar and bass
CruzTOOLS developed the GrooveTech String Cutters specifically for Guitar and Bass strings. A special induction heat-treatment process prevents blades from denting, and the high-leverage handle design makes even "B" bass strings easy to cut. Comfortable rubber grips feel good in your hands, and the cutters are compact enough to fit into any guitar case or gig bag.
$11.95
Click to read more about this product.
S-Z150Digital Capacitance Meter - YF-150

Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc.



  • 0.1 pf to 20,000 μF, 9 ranges
  • Over range indicator
  • 0.5% basic accuracy
  • Tilt stand
  • 3-1/2 digit LCD, 1" h x 2-¼" w
  • 1.5" x 2.8" x 6"
  • Zero adjustment
  • 1.1 lbs
  • Input protected
  • Low battery indicator
  • Includes case, leads, battery, spare fuse and instructions

$42.95
Click to read more about this product.

Pages

(22 pages)
Subscribe to RSS - Tech Supplies