You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(24 pages)
S-T170MPliers - Xcelite, shearcutter, general purpose

5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:



  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)

$8.25
$7.34
You save: 11%
Click to read more
S-T1715Staking Tool - for Eyelets and Turrets
Turret staking tool.
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$9.95
$8.86
You save: 11%
Click to read more
S-TST1Soldering iron tip - Weller, screwdriver 1/16", for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST1 - .062" / 1.58 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$4.25
$3.78
You save: 11%
Click to read more
S-TST3Soldering iron tip - Weller, screwdriver ⅛", for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST3 - .125" / 3.17 mm wide Screwdriver tip
  • Tinned with Lead Free alloy
$5.50
$4.90
You save: 11%
Click to read more
S-TST7Soldering iron tip - Weller, conical, for WLC100/WP35
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.
  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST7 - .031" / 0.79 mm diameter Conical tip
  • Tinned with Lead Free alloy
$4.95
$4.41
You save: 11%
Click to read more
S-T806The Nibbler - cutter for square holes

Instructions



  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.

$6.95
$6.19
You save: 11%
Click to read more
S-W111Wire - 22 AWG, stranded with tin braid
For vintage reverb tank cables. 22 AWG, stranded with tin braid. Outer Diameter: 0.10".
105°C temperature rating, 600V. Sold per foot.
$0.95
$0.85
You save: 11%
Click to read more
P-PC-PAD1PadBoard - Size 1, Double Sided, Plated Holes

Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. An anti-tarnish coating protects the copper for a long shelf-life and provides easy soldering.



For fastening your project to a surface see our adhesive standoffs (S-H190-X)



Features:



  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
  • 31 x 19 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size 1 = 1.97 x 3.15in (50 x 80mm), 1/16" thick (1.6mm)

$2.95
$2.63
You save: 11%
Click to read more
S-TGTSC1String Cutters - CruzTOOLS GrooveTech, for guitar and bass

CruzTOOLS developed the GrooveTech String Cutters specifically for Guitar and Bass strings. A special induction heat-treatment process prevents blades from denting, and the high-leverage handle design makes even "B" bass strings easy to cut. Comfortable rubber grips feel good in your hands, and the cutters are compact enough to fit into any guitar case or gig bag.


$11.95
$10.64
You save: 11%
Click to read more
S-Z150Digital Capacitance Meter - YF-150

Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc.



  • 0.1 pf to 20,000 μF, 9 ranges
  • Over range indicator
  • 0.5% basic accuracy
  • Tilt stand
  • 3-1/2 digit LCD, 1" h x 2-¼" w
  • 1.5" x 2.8" x 6"
  • Zero adjustment
  • 1.1 lbs
  • Input protected
  • Low battery indicator
  • Includes case, leads, battery, spare fuse and instructions

$42.95
$38.23
You save: 11%
Click to read more

Pages

(24 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Tech Supplies