You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(7 pages)
S-T1715Staking Tool - for Eyelets and Turrets
Turret staking tool.
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$9.95
Click to read more about this product.
S-T22-XSolder wick - GC Braid, multiple sizes
Multiple Options Available
5 feet Long. Great for removing solder from printed circuit boards.
Starting at $3.50
Click to read more about this product.
S-T8454Alignment Kit - GC Electronics, for color TVs
Contains 5 different tools for all standard adjustments. Includes extend-it for long reaches. Tools are Delrin packaged in pocket-saver pouch.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • Z-7614 PVC Alignment tool
$7.95
Click to read more about this product.
S-T156Heat Sink - dissipate heat during soldering
Temporary Heat Sink. Absorb & dissipate heat during soldering/desoldering sensitive parts. Made in Taiwan.
$1.75
Click to read more about this product.
S-T806The Nibbler - cutter for square holes

Instructions



  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.

$6.95
Click to read more about this product.
S-T170MPliers - Xcelite, shearcutter, general purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc.
Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
$7.95
Click to read more about this product.
S-T9004Solder - Kester, 60/40, 44 Flux, 66 Core, .031 Dia, .5 OZ
Kester 44 60/40 rosin core type. .031" diameter, 0.5 oz
$5.50
Click to read more about this product.
S-T9000XSolder - Kester 44, 1 lb spool
Multiple Options Available
(60/40 Rosin Core) - ..031" or .050" Diameter, 1 lb Spool, contains lead alloy.
Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades.
An outstanding performance feature of this flux is the “instant-action” wetting behavior.
$31.95
Click to read more about this product.
S-T18-530Alignment Kit - GC Electronics, for CB
Contains
  • 5009 Duplex no-metal screwdriver
  • 5097 K-tran tool
  • 8271 core aligner
  • 8282 Zenith alignment tool
  • 9091 hex iron core tool
  • 9440 transistor tool
  • 8276 Duplex aligner
  • 9304 double end tool
$11.95
Click to read more about this product.
S-TGTJPT1Tool - Cruz Tools, GrooveTech Jack/Pot Tool
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - ½", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear. Add a dab of threadlocker, and you'll probably never have to deal with that loose jack again. Sockets are pro-grade with a dazzling polished chrome finish.
$14.95
Click to read more about this product.

Pages

(7 pages)
Subscribe to RSS - Tech Supplies