You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(21 pages)
S-ZVT1000Valve Tester - Orange, VT-1000
The compact and extremely easy to use VT1000 is a fully automatic valve tester, which performs a wide range of tests quickly and accurately. The benefits of using the VT1000 are clear and wide reaching; users can quickly and simply match and test valves, plus receive a reliable health check as to whether their valves are good, bad or worn.
Orange Amps developed the world's first fully automatic, portable, digital valve tester, the VT1000, to make it easy to test amp valves. Until now testing valves with little or no knowledge of valve theory was difficult, expensive and often unreliable.
$499.00
Click to read more about this product.
S-TBM4Bias Master™ - TAD, with 4 Octal Probes
BIASMASTER System BM4 Measures BIAS current of any 6L6GC, 6550, EL34, 6V6GT, 5881, KT66, KT88, KT90, KT100, KT120, 7027A etc. in your amp. Includes 4 octal probes (2x S-TBMA2) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current savely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result.
$195.00
Click to read more about this product.
S-TBM4-EL84Bias Master™ - TAD, with 4 Noval Probes
BIASMASTER System BM4-EL84 Measures BIAS current of any EL84 etc. in your amp. Includes 4 noval probes (2x S-TBMA2-EL84) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current safely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result. This lets you set and evaluate all reasonable biasing range your amp and tubes offers to find and set your personal perfect choice.
The Bias setting has a dramatic impact on the amp's response, break-up and dynamic character.
$195.00
Click to read more about this product.
S-TWTCPTSoldering station - Weller, WTCPT, controlled output
60 Watts, 120v Temperature Controlled Soldering Station
  • PU120T power unit, TC201T soldering pencil, PH1201ESD stand and sponge
  • A lighted rocker switch indicates on/off status
  • Quick disconnect plug for soldering iron allows fast iron change
  • Power unit features impact resistant plastic for durability
  • Comes with S-TPTA7 tip
  • ESD safe to protect sensitive components
  • UL listed
$189.95
Click to read more about this product.
S-MAFGENGenerator - Audio Frequency
The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep.
$169.95
Click to read more about this product.
S-MRFGENGenerator - RF Signal
Compact solid state RF signal generator designed for the hobbyist, service bench and technical instruction. The generator is most suitedfor checking and aligning the IF circuit and tuners in AM, FM, and TV's. 100KHz to 150MHz in 6 bands and up to 450MHz on third harmonics. 5.9" high x 9.8" wide x 5.1" deep.
Features:
  • Wide frequency range- 100 Khz to 150 MHz
  • With 1 KHz oscillator purpose of modulation
  • High Stability
  • Output control- 0dB/-20dB/-40dB and fine adjuster
  • Frequency accuracy + or - 5%
  • RF output- 100mV rms appx.
$169.95
Click to read more about this product.
S-TBIASMETERBias and Matching Meter - Alessandro, for testing tubes
After all is said and done, few components are as critical to the quality of your sound as your power tubes. In short, improperly balanced and biased tubes can wreak havoc with your amp's overall performance, and more importantly with your sound.
Unbalanced tubes will draw unequal amounts of current, won't sound as musical, and will probably emit an audible hum. But the Alessandro Bias and Matching Meter lets you regain control over your amp's sonic output.
$155.00
Click to read more about this product.
S-TWES51Solder Station - Weller, WES51, analog
The Weller WES51 Analog Soldering Station, with included soldering pencil, stand, and sponge, is the perfect choice for a variety of soldering applications, including industrial manufacturing, rework, repairs, and more. The comfortable foam-grip pencil and variable temperature controls give you complete command of your work for precise results. Plus, with a non-burnable silicone rubber cord, ESD safety, and automatic shut-off technology, the WES51 is safe enough to use in a continuous production environment.
$129.95
Click to read more about this product.
S-T9000-LFSolder - Kester 48, lead-free 1 lb spool
(96.5% Tin, 3% Silver,.5% Copper) -.05" Diameter, 1 lb Spool
$89.00
Click to read more about this product.
S-T9003-LFSolder - Kester 48, .031", Flux 66, Lead-free 1 lb Spool
Lead free solder, Sn96.5Ag3.0Cu0.5, 031" diameter, rosin flux, core 66.
Kester SAC305 48 Activated Rosin Flux for cored solder wire was developed for lead-free applications to enable soldering of most common metals.
$80.00
Click to read more about this product.

Pages

(21 pages)
Subscribe to RSS - Tech Supplies