You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(24 pages)
S-C10-3702Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
$9.85
Click to read more
S-C10-8109Heat Sink Compound - silicone, Type Z9, 1 oz
Type Z9, 1 fluid ounce. Silicone base, extra high-efficiency heat transfer. Made in USA. For mounting transistors, diodes, rectifiers, and resistors. Thermal joint compound for any device where efficient cooling is desired.
  • For effective transfer of heat between components & heat sinks
  • Will not dry or harden
  • White paste

Grease-like consistency; opaque white in color; zero bleed; very stable at elevated temperatures; excellent thermal resistance and high thermal conductivity; efficient thermal coupler; effective and positive heat sink sealers and heat transfer agent. The product offers high thermal conductivity, virtually no bleed or evaporation over a wide operating temperature range. It will not harden, dry out or melt after 1,000 hours at 200°C. Meets Mil-C-47009 and Mil-C-47113.
$6.75
Click to read more
S-C10-8602Belt and Drive Non-Slip - GC Electronics
Prevents slippage in mechanical or electro-mechanical devices, which are driven with cords, belts, pulleys and drives. Restores proper functions on belts and drive pulleys in turntables, record changers and tape recorders, especially where the rubber parts have hardened and/or become slick and cause slippage.
  • Color: Clear to light brown
  • Specific Gravity: 0.91
  • Flash point: 54°F
  • Freezing Point: <90°C
  • Solubility in Water by wt.: 100% at 20°C
$7.95
Click to read more
S-C250Polish - Magnolia Glayzit, restores Bakelite

For restoration of Bakelite. A siliconized polish that restore Bakelite with its blend of premium wax and oil.


$14.50
Click to read more
S-M12-1080Heat Shrink - Assorted diameters, 6" long, 23 pieces
The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths.
$4.50
Click to read more
S-T18-530Alignment Kit - GC Electronics, for CB
Contains
  • 5009 Duplex no-metal screwdriver
  • 5097 K-tran tool
  • 8271 core aligner
  • 8282 Zenith alignment tool
  • 9091 hex iron core tool
  • 9440 transistor tool
  • 8276 Duplex aligner
  • 9304 double end tool
$11.95
Click to read more
S-T8276Aligner - GC Electronics, Duplex
Butyrate shaft 6-1/8" long with 1/8" wide steel tips. Tip on one end recessed.
  • Material: Conductive Nylon Metal
  • End: 1/8"
  • End 2: 1/8"
$1.95
Click to read more
S-T9091Hex Tool - GC Electronics, Double End ⅛"
Molded from Delrin, 5-3/32" long. Ends are 1/8" hex with .10" wide by .02" thick plastic screw driver on one end.
$1.95
Click to read more
S-T9338Burnishing Tool - GC Electronics, ¼" wide, steel

Stainless steel strip, microscored to an ultrafine file surface. Remove oxide and corrosion on contacts made of platinum, paladium, moybdenum, gold, tungsten, and silver.


$2.50
Click to read more
S-W600-WWire - Push Back Cloth for Single Coil Pickup, White

White vintage style push back wire for building or repairing single coil pickups.Push back style eliminates the need for stripping.



  • Diameter: 0.07"
  • Length: 12"
  • Sold individually

$1.25
Click to read more

Pages

(24 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Tech Supplies