Terminal Boards & Strips

Eyelets, bag of 10 (mounts in 1/8" hole).

Turrets for use on boards measuring 3mm thick, such as P-HTUR-C or P-HTUR-B. For 2mm boards, see S-HTUR-AX
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717

Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-BX
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.

• .062" thick
• 3" x 15"

Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.

Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.

Hollow Turret Terminal,Brass, .172" Long, Premium.

• Finish/Plating: Tin
• For Panel Thickness: .125 [3.2]
• Material: Brass
• Mounting Hole: 0.116
• Terminal Length: 0.312
• Terminal Style: Tubular Turret
• Type: Solder Turret Terminal
• Package of 10

Blank board, 10-1/8" x 2-5/8", 189 3mm holes on 3/8" centers.

• Blue, Green, Yellow: 2 mm board thickness
• Black, Red: 3 mm board thickness

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.

Turret strip, with 23 turrets. Measures 241.3mm x 15.875mm.

300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!

• Accepts 2mm turrets.

Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.

Turret board with pre installed turrets designed to be used to build a 5F1 layout or variants.

• 2mm board
• 5F1 Layout

Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate.

• Accepts 2mm turrets.

Turret strip, with 6 turrets. Measures 67mm x 15.875mm.

258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.

Turret strip, with 9 turrets. Measures 95mm x 15.875mm.

Turret strip, with 11 turrets. Measures 127mm x 15.875mm.

Turret anvil for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For staking tool see S-T1715
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

1 row/6 lugs per row, 2 mounting holes. Board dimensions 3" x ½".

Oversized blank G-10 epoxy boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.

2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.