Terminal Boards & Strips

Turret Strip - 16 Lugs, Two Rows, U-style
Two rows of 8 U-style terminals (16 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
$1.79
PCB - Vintage Style Circuit Board, Iss. 1 Fuzz, Phenolic Board
Iss. 1 fuzz PCB made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This PCB is a recreation of the iss. 1 circuit board found in classic Fuzz Face pedals. When drawing the layout, multiple originals were closely referenced to ensure a proper match and fit. The copper traces are gold plated providing protection from corrosion indefinitely. This classic board fits the mounting holes on both original and reproduction Fuzz Face enclosures.
$4.50
Contact Pin - Nickel Plated Brass, Seamless, 0.566" Height
0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
$0.15
Turret Strip - 24 Lugs, Two Rows, U-style, Extra Dense
Two rows of 12 U-style terminals (24 total) on a black board. This U-style terminal strip is extra dense with 6.35mm terminal spacing allowing for even more densely populated point-to-point builds. The boards are 0.063” thick. This 24 lug turret board is a close match to the board found in Burns BuzzAround pedals.
$2.95
Turret Strip - 241.3mm x15.875mm , loaded with 23 turrets
Turret strip, with 23 turrets. Measures 241.3mm x 15.875mm.
$6.55
Turret Board - Blank, No Holes, Black G-10, 11-⅞" x 7-1/16”
Oversized blank G-10 epoxy boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.
Starting at $9.95
Turret Board - 2mm, Loaded with 60 Turrets, 300mm x 60mm
300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!
  • Accepts 2mm turrets.
$13.40
Turret Strip - 77mm x 32mm , loaded with 12 turrets
Turret strip, with 12 turrets. Measures 77mm x 32mm.
$6.00
Terminal Strip - 6 Lug, 1st & 6th Lug Common, Horizontal
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.
$5.95
package of 5
Turret Board - Blank, 216 Holes, 10 ⅛” x 3”, Phenolic
Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 216 hole version has 8 rows and 27 columns. This size can be found in vintage Marshall amps such as various revisions of the JTM45 and 50W JMP amps.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.
$7.50
Terminal Pin - PCB Mount, 0.05” Diameter, 0.25” Length
PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.
$0.79
PCB - Pseudo Eyelet Board, 6.35mm Spacing, 2 x 9
PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 6.35mm horizontally and 22mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. 2x9 Board:
  • 2 rows of 9 eyelets (18 total)
  • 6.35mm x 22mm eyelet spacing
  • 55.44mm x 26.66mm board
  • 45mm spacing for 3.2mm mounting holes
  • Great fit for 1590B and Gorva C65 enclosures
$1.60
Turret Strip - 13 Lugs, Single Row, U-style
Single row of 13 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
$1.39
PCB - Vintage Style Circuit Board, Iss. 2 Fuzz, Phenolic Board
Iss. 2 fuzz PCB made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This PCB is a recreation of the iss. 2 circuit board found in classic Fuzz Face pedals. The iss. 2 version uses NPN silicon transistors. When drawing the layout, multiple originals were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. This classic board fits the mounting holes on both original and reproduction Fuzz Face enclosures. For the germanium iss. 1 version of this board, see P-PC-FUZZ-ISS1-BRN.
$4.50
On Backorder
Turret Strip - 12 Lugs, Two Rows, U-style, Extra Dense
Two rows of 6 U-style terminals (12 total) on a black board. This U-style terminal strip is extra dense with 6.35mm terminal spacing allowing for even more densely populated point-to-point builds. The boards are 0.063” thick.
$1.95
Terminal Strip - Barrier Strip, 5 Pole, Dual Lugs
High quality 5 pole dual barrier strip. These terminal blocks have a solid PBT base with plated brass terminals and combination head screws. Features:
  • PBT Base
  • Closed Back Design
  • Combo Phil-Slot Nickel-plated Steel Screws
  • Plated Brass Terminals
  • 5 Poles
  • 10 Lugs
  • 57.2mm Mounting Centers
  • UL 94V-0
$2.75
On Backorder
Turret Strip - 36 Lugs, Two Rows, U-style, Extra Dense
Two rows of 18 U-style terminals (36 total) on a black board. This U-style terminal strip is extra dense with 6.35mm terminal spacing allowing for even more densely populated point-to-point builds. The boards are 0.063” thick.
$3.50
Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10
Turret Strip - 67mm x15.875mm , loaded with 6 turrets
Turret strip, with 6 turrets. Measures 67mm x 15.875mm.
$3.29
Tagboard - 300mm x 56mm, 2 x 28 Tags
300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.
$10.00
PCB - Pseudo Eyelet Board, 9.1mm Spacing
PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 9.1mm horizontally and 34.4mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for 7.5mm spacing 2x8 Board:
  • 2 rows of 8 eyelets (16 total)
  • 9.1mm x 34.4mm eyelet spacing
  • 69.42mm x 40.1mm board
  • 54.6mm spacing for 3.2mm mounting holes
  • Great fit for 1590P1, Gorva S90, and YY slanted enclosures

2x10 Board:
  • 2 rows of 10 eyelets (20 total)
  • 9.1mm x 34.4mm eyelet spacing
  • 87.1mm x 40.1mm board
  • 72.8mm spacing for 3.2mm mounting holes
  • Great fit for 1590BB enclosures
Starting at $2.45
PCB - Charge Pump, -9V from +9V, Screw Mount
Screw mounted charge pump PCB for positive ground effects. This small PCB provides -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The PCB has a low profile design and is a simple addition to any build using a standoff to mount the board. This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.
$1.95
PCB - Mod® Electronics, Germanium Fuzz, For 1590B or 1590N1
PCB for a Fuzz Face style circuit with PCB mounted potentiometers. Its very low component count makes it a great beginner project. Builders can use preselected transistors from P-Q2N1309-SET-FF with its included resistors for R1 through R4 for a simple and great sounding germanium fuzz. If a builder wants to use their own transistors, the stock component values are also clearly labeled on the PCB. The transistor footprints fit P-SGP-001 sockets making swapping transistors a simple process so builders can experiment with a variety of types and values. This board was designed for a 1590N1/125B or C65-sized enclosure, with the potentiometers spaced 30mm apart. It can also be mounted using the two screw-mount holes with the potentiometers wired off-board. There are two screw-mounting holes which are designed for M3 screws.
$3.50
Terminal Strip - 1 row, 6 turrets per row
1 row/6 lugs per row, 2 mounting holes. Board dimensions 3" x ½".
$5.25