Terminal Boards & Strips

Zonk Machine style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in the Zonk Machine pedal. The board is styled after the early version that featured a printed circuit rather than a stripboard construction. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. This board includes a blank mounting PCB. This PCB sits directly beneath the main board to mount it directly to the enclosure using screws. For a detailed drawing of the parts and connections originally used on this board, please see the layout drawing linked below.

Replacement board for Marshall JCM 2000 DSL 100 amplifiers which frequently have issues with original boards. This replacement can bring your amp back to life!

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.

V828 Italian fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in the V828 Vox Tone Bender pedals. The board is styled after the Italian made version which was also sold as the Jen Fuzz. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. This board uses unique PCB mounted tags for the offboard wiring. A combination of S-HEYE-A eyelets and S-H137 solder tags (each sold separately) can be used to approximate the originals. For a detailed drawing of the parts and connections originally used on this board, please see the layout drawing linked below.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 7 lugs, first and seventh lug common.

Marshall PC Board for TSL 100 / 122. Rev 20.

Turret strip, with 23 turrets. Measures 241.3mm x 15.875mm.

Single row of 7 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Supa Fuzz style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in the SupaFuzz pedal. The board is styled after the first version that Marshall produced which featured a printed circuit rather than a stripboard construction. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. For a detailed drawing of the parts and connections originally used on this board, please see the layout drawing linked below.

230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.

Iss. 1 fuzz PCB made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This PCB is a recreation of the iss. 1 circuit board found in classic Fuzz Face pedals. When drawing the layout, multiple originals were closely referenced to ensure a proper match and fit. The copper traces are gold plated providing protection from corrosion indefinitely. This classic board fits the mounting holes on both original and reproduction Fuzz Face enclosures.

PCB for a Fuzz Face style circuit with PCB mounted potentiometers. Its very low component count makes it a great beginner project. Builders can use preselected transistors from P-Q2N1309-SET-FF with its included resistors for R1 through R4 for a simple and great sounding germanium fuzz. If a builder wants to use their own transistors, the stock component values are also clearly labeled on the PCB. The transistor footprints fit P-SGP-001 sockets making swapping transistors a simple process so builders can experiment with a variety of types and values. This board was designed for a 1590N1/125B or C65-sized enclosure, with the potentiometers spaced 30mm apart. It can also be mounted using the two screw-mount holes with the potentiometers wired off-board. There are two screw-mounting holes which are designed for M3 screws.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.

This board is a recreation of the MKI circuit board found in early Tone Bender pedals. When drawing the layout, an original board was closely referenced to ensure a proper match and fit. Since the MKI boards were hand drilled, the holes have an organic layout that was somewhat unique to each build. This board follows the exact hole pattern of one of these original builds. The build style is also fairly unique in the MK1. It is a point to point style board without eyelets or turrets. The leads of the parts are wrapped upward around the edge of the board and then solder is applied to connect the components. For a detailed drawing of the parts and connections originally used on this board, please see the layout drawing linked below. There are numerous great parts choices available for this PCB.

Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.

Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Standard size terminal strips, 1/16 thick bake lite tin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground fifth lug common.

Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 6.35mm horizontally and 22mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. 2x9 Board:

• 2 rows of 9 eyelets (18 total)
• 6.35mm x 22mm eyelet spacing
• 55.44mm x 26.66mm board
• 45mm spacing for 3.2mm mounting holes
• Great fit for 1590B and Gorva C65 enclosures

258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.

Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate.

• Accepts 2mm turrets.

2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.

Turret board with pre installed turrets designed to be used to build a 5F1 layout or variants.

• 2mm board
• 5F1 Layout

Two rows of 15 U-style terminals (30 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.