Terminal Boards & Strips

Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground first lug common

High quality bifurcated (slotted) turrets with a hollow post. These terminals are made of annealed brass with a 100% tin over nickel plating. These slotted turrets closely resemble those found in vintage Marshall amps.

• Triple turret with slot
• 9.12mm height when installed
• 3.18mm diameter
• For 3.0mm to 3.2mm panel thickness
• Recommended for mounting holes sized 2.68mm to 2.78mm
• Bright 100% tin finish
• Knurled underside of shoulder to prevent rotation once swaged

Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Blank board, 10-1/8" x 2-5/8", 189 3mm holes on 3/8" centers.

• Blue, Green, Yellow: 2 mm board thickness
• Black, Red: 3 mm board thickness

For vintage style phenolic boards, see P-HTUR-189-BRN and P-HTUR-216-BRN.

Turret strip, with 23 turrets. Measures 241.3mm x 15.875mm.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 7 lugs, first and seventh lug common.

Shatterbox style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in the Shatterbox pedal. The board is styled after the later version with a printed circuit rather than a stripboard construction. This is the same board that was used in the “split board” version which can be built by cutting the board down the middle to separate the fuzz section from the treble booster section. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. This board includes a blank mounting PCB. This PCB sits directly beneath the main board to mount it directly to the enclosure using screws.

Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 6 lug, 1 ground. Second lug common. Similar to the strip used in the Dallas Rangemaster.

Zonk Machine style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in the Zonk Machine pedal. The board is styled after the early version that featured a printed circuit rather than a stripboard construction. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. This board includes a blank mounting PCB. This PCB sits directly beneath the main board to mount it directly to the enclosure using screws. For a detailed drawing of the parts and connections originally used on this board, please see the layout drawing linked below.

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 189 hole version has 7 rows and 27 columns. This size can be found in vintage Marshall amps such as the 1973 and 1974 18W amps, 20W amps such as the 2022T JMP Tremolo 20, 2061 Lead-Bass, PA20, and the 10W 1930 Popular.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.

2 rows/6 lugs per row, 2 mounting holes. Board dimensions 3" x 1 ¼".

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 216 hole version has 8 rows and 27 columns. This size can be found in vintage Marshall amps such as various revisions of the JTM45 and 50W JMP amps.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.

1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".

200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.

Mini size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 1/4" centers.

2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.

Oversized blank G-10 epoxy boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.

300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.

Pseudo eyelet boards with 3 rows of ½” spacing. These 2mm thick boards have a vertical spacing of 1” from row to row. The pseudo eyelet PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The size and layout of the 3 x 29 works well for AB763 style builds. For a blank board to pair with this one for use as an insulator, see P-HBB-3X29.

• 3 rows of 29 eyelets (87 total)
• 0.5” x 1” eyelet spacing
• 14.5” x 2.5” board
• Great fit for AB763 style builds

AB763 sized blank FR-4 epoxy boards perfect for custom turret or eyelet boards. With no predilled holes, builders can make clean custom layouts for their projects. This board can also be used as the insulator for the P-HTBW-3X29 generic AB763 layout pseudo eyelet board.

Mini size terminal strips, 1/16" thick phenolic, tin plated brass solder lugs and brackets on 1/4" centers.

Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.

300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!

• Accepts 2mm turrets.

Turret anvil for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For staking tool see S-T1715
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board