Terminal Boards & Strips

Oversized blank G-10 boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.
Starting at $8.85

Staking tool for small eyelets such as S-HEYE-B. Directions:
- Drill hole using #42 drill bit
- Insert eyelet
- Flip board over onto a hard service
- Center staking tool over the eyelet
- Strike staking tool with hammer to clamp eyelet to board
$13.95

Package of 10
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
$0.80

Package of 5
Standard size terminal strips, 1/16 thick bake lite tin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground fifth lug common.
$5.00

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.
- .062" thick
- 3" x 15"
$2.45

Ceramic terminal strip, 1 row, 4 slots, 2.5mm thread.
$3.24

Replacement board for Marshall JCM 2000 DSL 100
$245.00

200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.
$9.82

2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.
$9.95

Turret anvil for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For staking tool see S-T1715
Directions:
For staking tool see S-T1715
Directions:
- Drill 1/8" hole
- Insert eyelet
- Flip board over on to a hard service
- Center staking tool over the eyelet
- Strike staking tool with hammer to clamp eyelet to board
$10.95

230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.
$15.31

2 rows/6 lugs per row, 2 mounting holes. Board dimensions 3" x 1 ¼".
$7.50

Package of 5
Standard size terminal strip, 1/16" thick bakelite, tin plated steel lugs and brackets on 3/8" centers.
$3.45

300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!
- Accepts 2mm turrets.
$12.02

Turret board with pre installed turrets designed to be used to build a 5F1 layout or variants.
- 2mm board
- 5F1 Layout
$5.43

Package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
$0.80

Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
$3.85

Colors Available:
- Blue, Green, Yellow: 2 mm board thickness
- Black, Red: 3 mm board thickness
Starting at $5.43

Package of 10
Colors Available:
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
Starting at $1.88

Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.
$4.50

Turret strip, with 23 turrets. Measures 241.3mm x 15.875mm.
$5.43

Marshall PC Board for TSL 100 / 122. Rev 20.
$236.25

Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.
$5.00

Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$33.95