Terminal Boards & Strips

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.70
package of 10

Colors Available:
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
Starting at $1.99
package of 10

Eyelets, bag of 10 (mounts in 1/8" hole).
$0.80
package of 10

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 8 lugs, first and eighth lug common.
$5.95
package of 5

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
$3.95
package of 5

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
$4.99
package of 5

Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
$0.85
package of 10

Colors Available:
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
Starting at $1.93
package of 10

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.
- .062" thick
- 3" x 15"
$2.65

Single row turret strips with a tab for mounting directly to tube socket mounting holes. The screw mount turrets are made of gold plated brass and are pre-mounted to the 2mm thick boards. The mounting hole is 0.15” in diameter. These turret strips are a great option for components connecting to the socket lugs of point to point builds.
Starting at $2.70

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7.5mm horizontally and 26mm vertically.
Starting at $1.50

Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.
$0.80

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
$4.65
package of 5

Standard size terminal strip, 1/16" thick bakelite, tin plated steel lugs and brackets on 3/8" centers.
$3.65
package of 5

Colors Available:
- Blue, Green, Yellow: 2 mm board thickness
- Black, Red: 3 mm board thickness
For vintage style phenolic boards, see P-HTUR-189-BRN and P-HTUR-216-BRN.
Starting at $6.55

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.
$5.95
package of 5

0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
$0.15

Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 6 lug, 1 ground. Second lug common. Similar to the strip used in the Dallas Rangemaster.
$5.95
package of 5

Flat-washer style solder tag for use with M3.5 or #6 screws. This small solder tag is an easy way to add a wire such as a chassis ground connection to a build. This solder tag is also a great match for vintage style builds such as Fuzz Face style effects pedals.
- Contact Material: Brass
- Contact Plating: Tin
- Inner Diameter: 3.5± 0.2 mm
- Outer Diameter: Ø6.3 ± 0.2 mm
- Length: 12.7 ± 0.5 mm
- Thickness: 0.35 mm
$1.35
package of 12

Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10

Colors Available:
Starting at $2.95

Two lug terminal boards for speaker frames. This board can be used to repair speakers with damaged or missing wire mount boards.
$1.00

Two rows of 18 U-style terminals (36 total) on a black board. This U-style terminal strip is extra dense with 6.35mm terminal spacing allowing for even more densely populated point-to-point builds. The boards are 0.063” thick.
$3.50

Single row of 5 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
$0.95