Tools

Adjustment Tool - Bourns Trimpots, H-90
Bourns trimmer adjustment tool. This tool is compatible with both the R-VT96Y-X multiturn trimmers and the R-VT62P-X single turn trimmers. The recessed end is especially helpful when used with the 3296Y trimmers to avoid slipping off of the screw adjuster. Features
  • Meets UL 94V-0
  • Pocket clip
  • For use on most trimmer shafts/rotors
  • Recessed end for use with extended shafts
  • RoHS compliant
$4.95
Alignment Kit - GC Electronics, for color TVs
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
$8.45
package of 6
Brush - Befaco, Gear Duster
Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.
$12.95
Brush - Flat Chip, 2”, 1500, applicator
2 inch flat chip brush great for applying tolex glue or any other purposes. This brush features a 4.75 inch wood handle.
$2.95
Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
  • Measures fret height before AND after fret installation
  • Accurate readouts in inches or millimeters
  • A must for all precision guitar work
$44.95
Case Tools - Multi-Tool for USA Fender Guitars, Groovetech, 4-in-1
An exclusive design from GrooveTech founder Dan Parks, this CaseTools Guitar Multi-Tool allows you to make quick tweaks to your Fender USA Guitar, and it’s small enough to fit right in the palm of your hand. It features four different sides: 1/8” ball-end hex wrench for truss rod adjustments, 1/16” and .05” hex wrenches for bridge adjustments, and a custom Phillips screwdriver bit shaped to handle both #1 and #2 screws like those in your neck and pickguard.
$11.95
Center Punch - Spring Loaded, Adjustable Force
Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.
$6.45
Cutters - Diagonal, With Lead Catcher
Diagonal cutters with an attachment for catching cut leads. This set of cutting pliers is made from high quality carbon steel with a hardened finish. The catcher can also be removed for use with vacuum attachments.
$28.95
Cutters - Xcelite, Relieved Tapered Head
  • Relieved tapered head-flush cutter
  • Allows use between closely spaced components
  • Features blue cushion grips
$35.60
Cutters - Xcelite, Shearcutter, General Purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
$15.95
Desoldering Pump - Manual, for removing solder
Handheld desoldering pump for solder removal. The enhanced dual spring-loaded piston creates a powerful vacuum for easy removal of molten solder. The static free tip is self cleaning and made from a clog resistant material. The aluminum body is lightweight and durable.
$16.95
Drum Key Multi-Tool - DK Multi, Groovetech, 4-in-1
The DK Multi Multi-Tool is a drum key made from pro-grade materials for exceptional durability with three metric-hex-wrench ends to cover pedal and other adjustments. The DK Drum Multi Multi-Tool is the sturdiest, handiest drum key you’ll ever buy. Made from pro-grade chrome vanadium steel, the centerpiece is a forged skeleton made to precision tolerances, ensuring exceptional durability and a proper fit. It comes wrapped in a polypropylene jacket for a comfortable feel. But that’s not all. We added three metric hex wrenches to cover the most common sizes found on drum hardware—especially pedals. Even with all of these features, the DK Multi Multi-Tool is about the same size as a standard drum key. This is likely to become your favorite. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.
$9.95
Drum Multi-Tool - Groovetech, 14-in-1
This multi-tool has everything you need to maintain your drum kit before, during, and after performances and practice sessions, from our T-Handle Drum Key to screw driver bits and hex key wrenches. Drums take a beating. Literally. That means ongoing adjustment and repair—even during a performance. That’s where the GrooveTech Drum Multi-Tool comes in. It'll quickly remedy problems on virtually all makes and models of drums and hardware, starting with a drum key that's made to the same high standards as our T-Handle Drum Key. And no multi-tool would be complete without the standard array of screwdrivers, so we provide a 5mm slotted and #1 and #2 Phillips. But where this tool really adds value is its collection of both inch and metric hex wrench sizes to handle pedals and other hardware.
$16.95
Fret File - Diamond, offset, for dressing and shaping frets
Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.
$66.95
Fret File - Fret Dressing File, Hard Chrome Coated, for Stainless Steel Fretwire
Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.
  • Size Medium = 2mm radius for medium frets.
  • Size Jumbo = 3mm radius for jumbo frets.
$46.95
Guitar Nut Cube - for adjusting guitar nuts
Unique tool for the easy removal and adjustment of potentiometers and switches from guitars
$15.95
Guitar/Bass Multi-Tool - Mini-Multi, Groovetech, 14-in-1
This multi-tool has everything you need to make quick, gig-saving adjustments on the fly, featuring hex wrenches, screwdrivers, and a precision ruler for tremolo, action, pickup height, and other basic tweaks using both metric and imperial units. The GrooveTech Mini-Multi Guitar/Bass Multi-Tool is designed for all those on-the-fly adjustments you might need to make when it counts the most. It comes equipped with hex wrenches, screwdrivers, and a precision ruler so that you can quickly adjust your tremolo system, action, pickup height, and other basic functions. Oh, and it comes with a super-handy bottle opener for when you need to get to that refreshing beverage after the gig. Virtually all makes and models of guitars and basses are covered. Tools are pro-grade and absolutely dependable. Don’t head to the gig without a Mini-Multi Guitar/Bass Multi-Tool in your pocket. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.
$11.95
Hobby Knife - X-Acto, #1 Knife with #11 Blade
The X-ACTO #1 knife set is the classic X-Acto blade handle. The pointed tip of the sharp #11 blade allows for precise cutting. The #1 Knife is compatible with the 10, 12, 13, 16 and 17 X-Acto blades. Includes:
  • X-Acto #1 Knife
  • #11 blade
  • Safety cap
$6.60
Knife - Scraper tool, Retractable Blade
High Quality retractable scraper blade. House in a small but comfortably sized handle, the blade makes scraping a simple task.
  • Scrape paint off, clean glass.
  • Retractable locking blade.
  • Includes 1 single-edge blade.
$5.95
Knife - Steel Utility box cutter-style, Black
Box cutter-style steel utility knife. This high quality, heavy-duty knife easily cuts tape, cartons, strapping and twine. Zinc die cast. Retractable with 3 blade-locking positions for safety. Includes three heavy-duty blades.
$8.45
Multi Tool - Dunlop, System 65, for guitar / bass work
The Dunlop System 65 Multi Tool is a compact tool that can cover the gamut of setup work for guitars and basses. Whether it’s a pickup height issue, truss rod adjustment, or a tweak in the action, this multitool can do it all.
$14.95
Multi-Tool - GrooveTech, for Guitar and Bass
The GrooveTech Guitar/Bass Multi-Tool has everything you need to give your guitar or bass a full setup—and it’ll all fit in your pocket or your gig bag. For truss rod adjustments, this multi-tool is equipped with three ball-end hex wrenches for standard nuts and a a 5/16” nut driver for Gibson-style nuts. Additional hex wrenches cover bridge and tremolo adjustments, and if you need to work on an instrument with vintage-style saddle screws, the 2.5mm slotted screwdriver is ready to go. Need to remove your pick guard or neck plate or put on a new set of Straplok® Strap Buttons? The two Phillips screwdrivers will take care of these and other needs. Finally, the ruler will help you check neck relief and string action.
All wrenches are pro-grade, using heat-treated S2 steel with a polished chrome finish.
$16.95
Needle Nose Pliers - Xcelite, 6", long
Extra long nose, Serrated jaws, Green cushion grips Product Features:
  • Long needle nose pliers
  • Extra long nose
  • Features serrated jaws
  • Features green cushion grips
$35.95
Pliers - Xcelite, 60 degree curved nose
Xcelite Curved Nose Pliers, with 60° curved nose, and green cushion grips. Replacement spring is S-TCPS7
Product Features:
  • Curved nose pliers
  • Thin tip
  • Features green cushion grips
  • Features serrated jaws
$40.69