You are here

Tools

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(16 pages)
S-T-RFXTool - Precision Devices, Lead Former, Various Sizes

High quality, made in USA lead formers. These are great tools for bending component leads to fit various footprints. The radiused ends provide a right angle bend that does not stress the metal lead. These lead formers are made of high impact ABS plastic.


$4.95
Click to read more
S-T9338Burnishing Tool - GC Electronics, ¼" wide, steel

Stainless steel strip, microscored to an ultrafine file surface. Remove oxide and corrosion on contacts made of platinum, paladium, moybdenum, gold, tungsten, and silver.


$3.50
Click to read more
S-H190-XStandoffs - 0.18", plastic with adhesive backing

Low-profile adhesive standoffs with a 0.180" standoff height that securely attaches your PCB to a flat surface. The post inserts into a 0.125” mounting hole and includes a locking tab that secures the PCB when inserted. It can be used with 1/16” or 1/32” thick PCBs. The 0.6 x 0.6” square base is offset to allow the base to be underneath the board when the mounting hole is close to the PCB edge and the offset base provides a large sticking surface while permitting the PCB to be mounted in tight spaces or close to walls. This can be useful when working with small enclosures. High-quality 3M™ brand double-sided tape secures the standoff to a flat surface. These standoffs are available in packs of 8, 24, or 100 pieces Features:



  • Low profile 0.180" standoff height.
  • Offset base allows use when holes are close to the PCB edge.

Starting at $2.25
Click to read more
S-CRSF-R80-XSoldering Flux - Caig, non-spill Rosin Flux

Low residue, no-spill. Thermal stability enabling excellent wetting and reduced carbonization at soldering temperature. No-clean flux can be removed by wiping with a cloth or with cleaning solvent. Nonflammable and non corrosive. Recommended for electrical and electronic soldering applications.


Starting at $7.15
Click to read more
S-T229-XTwo-Way Sanding Block - for Fret Sanding

Two-way sanding block for radius fretboard sanding. There are two different radiuses on each block. Sandpaper not included.


Starting at $15.95
Click to read more
S-T205Fingerboard Guards - 2 Sizes, for protecting frets
Package of 2

Designed to protect the fingerboard when doing work on your frets. These shields are indispensable when doing any sort of fret work. Being only .010” thick they can bend to accommodate and fingerboard radius. Made of 304 spring stainless steel.



Comes with 2 sizes: 3-1/8" x 7/8" x .010" - 1/4 inch protection on either side of the fret, 3-1/8"" x 0.59" x .010"" - 3/8 inch protection on either side of the fret


$4.25
Click to read more
S-TST7Soldering iron tip - Weller, solid core, conical, ST Series

Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.



  • ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
  • Precision ground copper tips are plated with iron, nickel and chromium
  • ST7 - .031" / 0.79 mm diameter Conical tip
  • Tinned with Lead Free alloy

$4.95
Click to read more
S-T237Fret Rocker - for Identifying Uneven Frets

Fret rocker luthier tool. Four precision ground flat edges having lengths: 4.0”, 3.0”, 2.0” and 1.3”. Perfect for finding the source of fret buzz. Place the flat edge over three frets at a time and try to rock the tool. If the tool rocks, you’ve located the uneven fret.


$8.75
Click to read more
S-THHMTool - Helping Hand with Magnifier, 65mm, 2.5X
Magnifier with 2 ½" lens. Both clamps and magnifier can be removed. Great for precision work on circuit boards, solders and repairs. 6 ball joints for any angle. Simple to adjust thumb screws. Nickel plating fittings. Sturdy iron cast base. Alligator spring clips
$5.95
Click to read more
S-T261Fret Press Inserts - for Pressing Frets, Multiple Radiuses

Fret press inserts. 2.5” width brass inserts fit the S-T259-A and S-T260 fret press cauls. Used to press frets into guitar fret boards as an alternative to hammering.


$6.95
Click to read more

Pages

(16 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Tools