Tools

Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. This breadboard has the same pattern as a standard 400 connection point solderless plug-in breadboard which has a standard 5-hole strip for each IC pin, just like solderless breadboards. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The board has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used as well as a top side silkscreen to position components. Four mounting holes allow your projects to be secured.

Antistatic wrist strap with a banana plug connector and alligator clip attachment providing a variety of attachment options. This wrist strap is a great tool for handling static sensitive components. Features

• Strong anti-static properties
• High safety performance
• Lightweight thermoplastic construction
• Thin and soft elastic wrist band for a comfortable fit
• Wrist band can detach from cable

Two-way sanding block for radius fretboard sanding. There are two different radiuses on each block. Sandpaper not included.

Luthier tool, set of 2 scrapers for wood working. 0.4mm thickness.

IC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC™ Green wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners. Uses

• Threads of fasteners
• Bolts
• Screws
• Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Green to clean preassembled fasteners. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Green prevents the loosening of threaded fasteners from shock and vibration by wicking into threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by localized heating and hand tools. Remove residue with a damp cloth. Similar to Loctite Green.

Small magnetizer / demagnetizer for use with hand tools. Simply pass a tool such as a screwdriver through the square hole to magnetize the tool and pass it through the u-shaped channel to demagnetize the tool. Note: When passing through the square cutout to magnetize a tool, be sure to keep the tool from touching the four walls of the magnetizer to ensure a proper magnetization. When using the demagnetizer, the tool can touch the plastic of the channel.

Standard fret slot cutting saw with 0.50/0.60 mm pitch. Made in Japan. Overall length = 324 mm (12 ¾”) Cutting Length = 115 mm (4 ½”) Blade Depth = 30 mm (1 3/16”)

Fret press caul. Perfect for converting your drill press or arbor press into a fret press. 3/8” shank. (Includes 2.5 mm hex key).
Used with radius inserts (S-T261) to press frets into guitar fret boards.

Custom wrench tool for Bananuts. The two pegs slot into the notches on the Bananuts for an easy installation. Note: This wrench is only compatible with Befaco Bananuts

MT1 - 0.031" / 0.8 mm Conical Tip For Weller SP23 / SP25 Series Irons. Package of 2

• Consumer tip series from Weller
• MT series tips are plated with Electroless Nickel for ease of wetting during soldering
• 10/24" Thread in tips for SP23 / SP25 series soldering irons

Hand riveter with four nose pieces and 100 rivets. The included nose pieces fit 3/32”, 1/8”, 5/32”, and 3/16” rivets. A small wrench is tucked into the grip so users can quickly change the nose pieces as needed. This set includes 100 rivets; 25 in each of the compatible sizes.

• 3/32”, 1/8”, 5/32”, and 3/16” nose pieces
• All-steel construction
• Comfortable vinyl grip
• Easily switch between nose sizes using the included wrench

IC-LOC™ Blue is a medium thickness, medium strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required. Uses

• Threads of fasteners
• Bolts
• Screws
• Nuts

Directions: Shake well, then apply IC-LOC™ Blue to the clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Blue is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Blue prevents loosening of fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Blue seals and prevents rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Remove residue with a damp cloth. Similar to Loctite Blue.

Staking tool for small eyelets such as S-HEYE-B. Directions:

• Drill hole using #42 drill bit
• Insert eyelet
• Flip board over onto a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Set of files for precision work.
Includes:

• flat
• half round
• round
• square
• three square (i.e. triangular)

Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench. Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.

• Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
• Gauge 3+4 has 14", 15", 16", and 20" radiuses
• Notched version great for taking measurements with strings on
• Set of 4

Multi-functional Fret Bender - bend or staighten either bulk fretwire or pre-cut short piece fret wire precisely and quickly! For bending fret wire, crank a length of fretwire through the fret bender, and it comes out curved and ready to install in a radiused fretboard. Get a perfect bend on enough wire for a whole guitar in just seconds. Precisely radiused fretwire makes your fretwork fast, accurate, and professional.
Can be mounted to a workbench by using the two 5/16” bolt holes.

Multi-function mini heat gun with two speed/temperature settings. This small handheld heat gun is fast and easy to use with its lightweight build and comfortable grip. The nozzle is equipped with a safety shield and the built-in stand makes safely resting it on a table top simple when in use. Ideal for:

• Heat Shrink Tubing
• Embossing
• Drying Paint
• Drying Glue
• Drying Ink

Features:

• 350 Watt
• cULus approved compliance for both US & Canadian markets
• Ideal for heat shrink tubing
• 2 speed/temperature settings featuring quiet operation
• 482°F (Low) / 662°F (High)
• Fast and easy to use
• Comfortable and lightweight
• Safety shield on nozzle
• Built-in bracket for self-support and table top use
• Double insulated power cord

Extra long nose, Serrated jaws, Green cushion grips Product Features:

• Long needle nose pliers
• Extra long nose
• Features serrated jaws
• Features green cushion grips

Prototyping circuit board (PCB) designed to fit the Hammond 1590BB die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590BB enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190). Features:

• Single-sided high-quality FR4 glass-epoxy circuit board.
• Convenient 2-hole pattern provides an easy way to connect parts.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
• 0.042" holes are drilled on 0.1" (2.54mm) centers. 4 mounting holes.
• PCB Size 3.20 x 4.25 in (81.3 x 108.0 mm)

Pack of 16 glues sticks for use with 7mm hot glue guns. These glue sticks use an EVA tackifier for a fast bonding, high strength, age resistant adhesion.

High quality carbon steel fret cutters for use with stainless steel fret wire. These newly designed cutters improve accuracy providing a flatter cut than other versions. Additionally the blades are designed for improved durability. The cutters can also be locked in the closed position for protection when not in use.

The self-aligning cradle rotates to provide full support to the back or front of the neck for increased stability during repairs or maintenance work.

Butyrate shaft 6-1/8" long with 1/8" wide steel tips. Tip on one end recessed.

• Material: Conductive Nylon Metal
• End: 1/8"
• End 2: 1/8"

Conductive copper foil tape for shielding guitar cavities, amplifier cabinets, or elsewhere. This tape features a strong adhesive backing and soldering directly to the surface is easy and results in a strong bond. Sold in 98ft rolls.