Tools

Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.

General purpose masking tape. Perfect for a variety of uses. Use for packaging and everyday needs. Withstands temperatures up to 150°F. This tape has a 0.5 inch width and 60 yard length.

Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.

Atten S-11 soldering iron stand with adjustable mounting angle and sponge holder. This stand is a great option for stand-alone soldering irons or as a replacement for a worn out stand.

A stable and versatile way to support your Dremel tool. This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.

The Dunlop System 65 Gig Light is a high lumen, road ready flashlight. At 3.7” in length it easily fits in a gig bag or pocket and can be safely secured with its metal belt clip. This flash light has three different modes that can be accessed by lightly tapping the power switch: high beam, low beam, and strobe. The beam can also be focused by adjusting the lens providing up to 100 yards of visible light with a tight focus. This waterproof flashlight runs on a single AA battery which is included.

Super-Gold+™ is foam-safe, odorless super glue. Super glues can produce fumes that can be irritating to the eyes and nose. While not toxic, some people can become sensitized to these fumes. Super-Gold+™ is BSI’s odorless form of Cyanoacrylate that gives the same high performance characteristics as BSI’s Insta-Cure+ without the irritating fumes. Super-Gold+ will not fog clear plastic and glass, which can occur with the use of standard Cyanoacrylates. It can also be used on all foams.

Atten JQ-050 50W hot glue gun. This glue gun is a great tool for diy projects of all kinds. With 50W of power and a fast heat time, using the gun is quick and easy. This glue gun uses 7mm glue sticks.

• Rapid heating for quick use
• Smooth glue delivery
• Simple and convenient use
• Suitable for DIY toys assembly, handmade items, repairs and more

5" wire stripper & cutter with cushion grip handles. Features:

• Cuts and strips both solid and stranded wire cleanly, neatly.
• Adjustable screw stop for different wire sizes.
• Hardened with ground blades.
• Red plastic-coated cushion grip provides maximum leverage.
• Strips 8AWG - 22AWG wire.

Set of files for control over shaping nuts and saddles.

• Half-round shape
• Flat shape
• Triangle shape

150mm length. Used to record the shape of a surface, which can then be used to trace a copy onto another surface. Needles are held firmly, which makes them easy to shape, but they remain in place when using to trace.

The Dunlop System 65 Multi Tool is a compact tool that can cover the gamut of setup work for guitars and basses. Whether it’s a pickup height issue, truss rod adjustment, or a tweak in the action, this multitool can do it all.

Atten T900 soldering iron tips. The hoof style is great for soldering through hole components and many other situations such as SMD soldering. The flatted cylindrical tip is perfect for drag soldering surface mount components. These tips are an excellent choice for use with the S-ST-2090D soldering station and S-ST-2065D soldering iron.

Lead free solder, Sn96.5Ag3.0Cu0.5, 031" diameter, rosin flux, core 66. Kester SAC305 48 Activated Rosin Flux for cored solder wire was developed for lead-free applications to enable soldering of most common metals.

1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.

Comfort grip marker with a soft, rubber handle for excellent grip and control. This fine tip permanent marker has low odor and is non-toxic. Instant-drying.

This is a set of measured vacuum tubes for use in TV-7 vacuum tube tester calibration. The values for each vacuum tube will be measured and included for the purpose of calibrating your own TV-7 tester at home. Steps for this calibration can be found online. Three tubes will be included:

• 6L6
• 6AU6
• 12AT7

These tubes are tested at the following settings: Tube Filament Settings Bias Shunt Range 6L6 6.3 HS5-3481 23 0 D Tube Filament Settings Bias Shunt Range 6AU6 6.3 ET1-5672 16 0 B Tube Filament Settings Bias Shunt Range 12AT7 12.6 EV7-6080 10 0 C Note that brands are not guaranteed to match photograph.

Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard. Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper. You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value. This next-generation science kit doesn’t seal the parts into simplified plastic blocks.

Remove sticky, greasy messes with Goo Gone Original and return your surfaces to their original condition. Works on adhesive, crayon, gum, glue.

• Surface safe - formula will not harm your surfaces
• Removes tape - excellent for removing tape from your surfaces
• Perfect for cleaning - great for cleaning clothing, dinnerware and tables
• Removes stickers- great for removing stickers from gifts or even cars
• Use on - adhesive, gum, crayon, glue

Strong, absorbent towels for auto and machine shops. Works like cloth for your tough jobs. Absorbs grease and oil, even when wet. Fits any standard paper towel dispenser. 11” x 9" sheets.

High quality wood carving files with a special toothpattern designed to avoid clogs and self-clean as you file. These files are available in three different lengths to meet the needs of any project and feature a half round shape.

The Dunlop System 65 Screwdriver is the perfect small sized tool for a gig bag or case. The four bits include two different Phillips heads and two different flat heads which can cover almost any screw used on guitars and basses.

Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.

• Size Medium = 2mm radius for medium frets.
• Size Jumbo = 3mm radius for jumbo frets.

Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.

• Hard chrome coated
• Two sided
• 6.25” x 1” x 0.225”