Tools

This stainless steel radius gauge can measure six different radiuses as well as fret crown heights and string action height. Overall size 210mm x 25mm
Includes

• 7.25"
• 9.5"
• 10"
• 12"
• 14"
• 16"

The GrooveTech bass player tech kit provides everything needed for basic work on your axe, and an Easy Setup Guide is included to take the mystery out of it. Tools are professional grade and lifetime guaranteed. Hex keys are USA made - color-coded gold for metric and black for inch - with ball-end tips on truss rod sizes. The 6-in-1 screwdriver has two Phillips and two slotted tips, including the size for vintage-style saddle screws, plus two nut drivers to fit Gibson and other headstock truss rod nuts. The GrooveTech string cutters will be the last set of cutters you'll ever need to buy, and precision measurement tools allow consistent results. The capo frees a hand during truss rod measurements, and there's a compartment behind the tools to store spare strings, your owner's manual, and the Setup Guide; plus another pocket to store picks.

The GrooveTech Guitar Player Tech Kit has everything you need to take care of your guitar with confidence, featuring top-shelf tools that have been optimized for just about every make and model of guitar. For your truss rod and string action adjustments, take your pick from the 11 color-coded hex wrenches—gold for metric, black for imperial. Truss rod sizes come with ball ends for hard-to-reach nuts. Check your neck relief with the capo and thickness gauge and your string action with the ruler. The 6-in-1 screwdriver, which comes with two Phillips bits, two slotted bits, and two nut drivers, allows for easy tightening or removal of various hardware pieces. Remove your strings in no time with the string cutters—they’ll cut through even bass strings with ease—and then string up again with a fast-action string winder. Tools are guaranteed with a limited lifetime warranty. Never worked on your instrument before?

Vintage-style truss rod nuts have long, thin slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage – as evidenced on many vintage guitars and basses. GrooveTech developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and our Standard Driver provides firm contact over the entire slot width for damage-free adjustment. The Cheater Driver™ allows quick minor adjustment without removing the neck. Both have oversized handles with extra-long shafts for a firm grip and easy access.

Genuine Weller narrow screw driver (chisel) style tips for use with all ST Series compatible soldering irons. The narrow screwdriver style is great for soldering in hard to reach and narrow spots. These tips are an excellent choice for use with the S-TWLC100 soldering station.
For use with Weller Irons: SP40N, WP25, WP30, and WP35; and WLC100 station

Easy to use cable tie gun cuts ties up to 50 lb. tensile. Use this tool to pull ties tightly and then cut the excess length.

This is a set of measured vacuum tubes for use in TV-7 vacuum tube tester calibration. The values for each vacuum tube will be measured and included for the purpose of calibrating your own TV-7 tester at home. Steps for this calibration can be found online. Three tubes will be included:

• 6L6
• 6AU6
• 12AT7

These tubes are tested at the following settings: Tube Filament Settings Bias Shunt Range 6L6 6.3 HS5-3481 23 0 D Tube Filament Settings Bias Shunt Range 6AU6 6.3 ET1-5672 16 0 B Tube Filament Settings Bias Shunt Range 12AT7 12.6 EV7-6080 10 0 C Note that brands are not guaranteed to match photograph.

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as Max-Cure™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want. IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes.

The Atten ST-862D high power hot air station. The ST-862D hot air station offers powerful heating with plenty of airflow in an affordable package with no compromises. Professionals have done detailed comparisons with machines more than three times the price and have found that the ST-862D performs just as well or better. The ST-862D is a great choice for beginners looking to learn SMD soldering and is also a great choice for those looking to upgrade their current setup.

Small flat chisel with an offset handle allowing this tool to easily get into tight spaces for luthier work. The 1.1mm blade is made of high quality HSS steel and is perfect when precision is required for nut slots and elsewhere. Made in Japan.

Three neodymium magnets on each end to ensure a straight cut at a right angle. The saw guide can adjust 0mm to 4.7mm slot depth by sliding the frame. The slide frame side has scale marks representing 1mm of depth. For use with S-T254.

Standard 2 inch width duct tape. Great for bundling, sealing and holding applications. For general repair, bundling and patching of lightweight items. 60 yards total.

Works like duct tape but leaves no residue. Used extensively in the entertainment industry. Can be used outdoors and tolerates UV rays. The matte finish back reduces light reflection. Gaff tape is easy to tear by hand. The temperature range is 40° to 200°F. Uses natural rubber adhesive. 29 oz./in. unwind adhesive.

This multi-tool has everything you need to maintain your drum kit before, during, and after performances and practice sessions, from our T-Handle Drum Key to screw driver bits and hex key wrenches. Drums take a beating. Literally. That means ongoing adjustment and repair—even during a performance. That’s where the GrooveTech Drum Multi-Tool comes in. It'll quickly remedy problems on virtually all makes and models of drums and hardware, starting with a drum key that's made to the same high standards as our T-Handle Drum Key. And no multi-tool would be complete without the standard array of screwdrivers, so we provide a 5mm slotted and #1 and #2 Phillips. But where this tool really adds value is its collection of both inch and metric hex wrench sizes to handle pedals and other hardware.

Box cutter-style steel utility knife. This high quality, heavy-duty knife easily cuts tape, cartons, strapping and twine. Zinc die cast. Retractable with 3 blade-locking positions for safety. Includes three heavy-duty blades.

Solder skillfully with Weller's 5 - 30 Variable Wattage Precision Soldering Iron Station. With its ergonomic molded pencil grip handle, on-board tip storage and cleaner, and integrated safety rest, it's the perfect high-quality and versatile soldering iron station for all your soldering needs. Features

• Integrated safety rest
• Power wattage up or down
• Quick tip change
• Compact design
• Optimal precision and control
• 750°F / 400°C

Allen wrench set of three: 2.5mm, 3mm, 4mm

I.C. hand lotion soothes dry, chafed skin caused by glove irritation and chemical contact. ESD-safe. Improves skin contact with wrist strap grounders. Contaminant-free, greaseless. Natural Non-Contaminating Static Dissipative Moisturizing Hand Lotion contains NO Silicones, Lanolin’s, Glycerin or Mineral Oils. Absorbs immediately into your skin and is greaseless. The IC Pre-gloving Moisturizer helps to relieve dermatitis, urticaria, “skin flaking”, chapping and other irritations due to regular use of gloves and will not degrade or weaken latex or Nitrile Gloves. Used in conjunction with wrist straps. Vitamins A, D & E lightly fragranced with all natural herbal steeped tea along with hints of grapefruit and lemon splashes.

• Helps to meet ANSI S20.20
• NSF E4 Certified for Food Handlers
• Static Dissipative and ESD Safe
• Helps Grounding to Wrist Straps
• CHG Compatible

Pack of 75 Tuff Wipes for use on hands and cleaning surfaces. 9 1/2 x 12" sized sheets.

• Easy-to-use textured wipes help clean up in a hurry.
• Economical. Tough on grease, gentle on hands and surfaces.
• Recommended for cleaning up paints, adhesives and lubricants.

Krylon 9090 high strength spray adhesive. This fast-acting adhesive has a variable volume controlled web spray pattern that offers high contact strength.

• Superior, permanent bond
• High contact strength
• Bonds heavy-duty materials like wood, metal, plastic, glass, laminate and more
• Dries in 30 minutes

For use on: Wood, Metal, Plastic, Glass, Paper, Papier-mâché, Plaster, Ceramic Application conditions: Best results when temperatures are 55° F to 75°F and humidity is below 60%. Applying outside this range may impact finish Indoor/outdoor: Interior/Exterior

High quality made in Japan spoon-shaped gouges for luthier work. These gouges have a hardness of HRC64 and a total length of 180mm. The hardwood handle features a flat end for hammering and a decorative handle. The blade material is Shiragami white steel.

Diagonal cutters with an attachment for catching cut leads. This set of cutting pliers is made from high quality carbon steel with a hardened finish. The catcher can also be removed for use with vacuum attachments.

This kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette. Kit includes:

• S-T235
• S-T256

The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.

• Excellent control
• Easy installation
• Accurate freehand routing

Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).

75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.