You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
P-T442Transformer - Power, 125 V, 15 mA

Specifications Primary 117 V, 50/60 Hz Secondary 125 V, 15 mA Filament Winding 12.6V, 0.3 A Mounting Centers 2" Mounting Type U-bracket Weight 0.7 lbs


$19.95
Click to read more
P-T1750X-FENDERTransformer - Hammond, Output, replacement for Fender
  • Replacements for Fender Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Starting at $18.44
Partially Out of Stock
Note:
  • 5W | 5k/8kΩ | 3.2/8/16Ω
  • 10W | 5482Ω | 8Ω
  • 15W | 6.95kΩ | 8Ω
  • 40W | 4kΩ | 4/8/16Ω
  • 50W | 4kΩ | 2/4/8Ω
  • 60W | 4.2kΩ | 2/4/8Ω
  • 100W | 2kΩ | 4/8/16Ω
  • 135W | 2kΩ | 4/8 Ω
are special order items.
Note: some of these items are special order items.
Click to read more
P-T431Transformer - Audio Interstage, Coil Assembly for P-T156
Coil assembly for P-T156. Use your own iron to preserve mechanical fit. Coil window is 1/2 x ½".
$14.75
On Backorder
Click to read more
P-C194BChoke - Hammond, for Fender Bandmaster, Dual Showman, etc.

Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$17.86
Click to read more
P-T263-XTransformer - Hammond, High Voltage Plate & Filament, Vertical mount
  • Vertical Mount. For Horizontal Mount, see P-T263-Z
  • Primary 115 VAC, 60 Hz. - except as noted
  • Enclosed, 4 hole, chassis mount.
  • Minimum 6" long leads.
  • Units can be run full wave bridge or full wave C.T.
  • Class A insulation (105 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • Conservative designs - CSA certified (209651).

$49.93
Starting at $48.97
You save: 2%
Partially Out of Stock
Note:
  • 200 V C.T. @ 115 mA
  • 300 V C.T. @ 86 mA
  • 360 V C.T. @ 287 mA
  • 450 V C.T. @ 75 mA
  • 480 V C.T. @ 46 mA
  • 550 V C.T. @ 57.5 mA
  • 700 V C.T. @ 103 mA
  • 720 V C.T. @ 138 mA
  • 750 V C.T. @ 126 mA
  • 850 V C.T. @ 172 mA
  • 1,000 V C.T. @ 230 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-T119DATransformer - Hammond, Audio Interstage, 12 Watt

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e.


$30.16
Click to read more
P-TF41318Transformer - Fender® Replacement, Output, 25 Watt, 8 Ohm
Replacement for Deluxe and Deluxe Reverb, 8 ohms.

Equivalent to #125A1A & #041318.
$36.24
Click to read more
P-TF50438Transformer - Fender®, Output, Hot Rod Deluxe and Blues Deluxe

Fender Original Hot Rod Deluxe and Blues Deluxe output transformer. 40 watts. Equivalent to #050438.


$41.50
Click to read more
P-TF41316Transformer - Fender® Replacement, Power, 330-0-330 V, 120 mA

Replacement for Fender Deluxe, Deluxe Reverb. Equivalent to #125P23B. Note: Does not fit Reissue '65 Reverb.


$64.95
Click to read more
P-TF37099Transformer - Fender®, Reverb, for Pro Reverb

Original Fender® reverb driver for Pro Reverb. Replacement for #037099. Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.


$8.95
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes