You are here

Transformers & Chokes

Hammond - Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(9 pages)
P-T261X6Transformer - Hammond, Plate & Filament or Bias, 6.3 V auxiliary
  • Primary 115 VAC, 60 Hz.
  • Designed for small power or bias supplies, test equipment, preamps etc.
  • Models P-T261C6, P-T261E6, and P-T261G6 can also be used with full wave C.T. rectifiers.
  • Economical , two hole, channel bracket, chassis mount.
  • Minimum 5" long leads.
  • Convenient 6.3 filament/auxiliary winding.

Starting at $33.87
Note:
  • 215 V @ 269 mA
  • 250 V @ 91 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-T154-P-T156-XFilter Choke - Hammond, Open Bracket

Features



  • Economical "open bracket" - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.

Starting at $13.02
Note:
  • 1.5 mH / 5 A
  • 6 mH / 2 A
  • 60 mH / 2 A
  • 3 H / 100 mA
  • 3.5 H / 150 mA
  • 5 H / 75 mA
  • 9 H / 40 mA (700 ohm)
  • 60 H / 8 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-T166X-6D3Transformer - Hammond, Low Voltage / Filament, Open, 6.3 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 6.3 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).

Starting at $10.98
Note:
  • 0.6 A
  • 1 A
  • 1.2 A
  • 10 A
are special order items.
Note: some of these items are special order items.
Click to read more
P-T1750X-FENDERTransformer - Hammond, Output, replacement for Fender
  • Replacements for Fender Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Starting at $18.44
Partially Out of Stock
Note:
  • 5W | 5k/8kΩ | 3.2/8/16Ω
  • 10W | 5482Ω | 8Ω
  • 15W | 6.95kΩ | 8Ω
  • 40W | 4kΩ | 4/8/16Ω
  • 50W | 4kΩ | 2/4/8Ω
  • 60W | 4.2kΩ | 2/4/8Ω
  • 100W | 2kΩ | 4/8/16Ω
  • 135W | 2kΩ | 4/8 Ω
are special order items.
Note: some of these items are special order items.
Click to read more
P-C194BChoke - Hammond, for Fender Bandmaster, Dual Showman, etc.

Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$17.86
Click to read more
P-T263-XTransformer - Hammond, High Voltage Plate & Filament, Vertical mount
  • Vertical Mount. For Horizontal Mount, see P-T263-Z
  • Primary 115 VAC, 60 Hz. - except as noted
  • Enclosed, 4 hole, chassis mount.
  • Minimum 6" long leads.
  • Units can be run full wave bridge or full wave C.T.
  • Class A insulation (105 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • Conservative designs - CSA certified (209651).

Starting at $49.93
Partially Out of Stock
Note:
  • 200 V C.T. @ 115 mA
  • 300 V C.T. @ 86 mA
  • 360 V C.T. @ 287 mA
  • 450 V C.T. @ 75 mA
  • 480 V C.T. @ 46 mA
  • 550 V C.T. @ 57.5 mA
  • 700 V C.T. @ 103 mA
  • 720 V C.T. @ 138 mA
  • 750 V C.T. @ 126 mA
  • 850 V C.T. @ 172 mA
  • 1,000 V C.T. @ 230 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-C194AChoke - Hammond, for Fender Deluxe, Deluxe Reverb, etc.

Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb Equivalent to Manufacturer part number 125C3A & 022707 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 50 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$16.42
Click to read more
P-T193XFilter Choke - Hammond, D.C. choke, Enclosed
  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 8" long leads.
  • Units will exhibit less inductance at slightly higher currents or more at lower currents.
  • Perfect for high voltage power supply filtering, case matches power transformers & tube audio output transformers.
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
  • For more sizes and voltages (open - bracket mount type) - see P-T154-P-T156-X
  • Operating temperature range is -40C to 85C

Starting at $38.65
Partially Out of Stock
Note:
  • 0.05 H / 2 A
  • 3 H / 500 mA
  • 5 H / 500 mA
  • 10 H / 150 mA
  • 10 H / 300 mA
  • 10 H / 500 mA
  • 12 H / 100 mA
  • 20 H / 100 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-T119DATransformer - Hammond, Audio Interstage, 12 Watt

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e.


$30.16
Click to read more
P-T166X-5Transformer - Hammond, Low Voltage / Filament, Open, 5 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 5 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).

Starting at $20.56
Note: 8 A is a special order item.
Click to read more

Pages

(9 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes