You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(2 pages)
P-CF22707Filter Choke - 50 mA for Fender® Deluxe & Vibrolux

Replacement for Fender Deluxe and Vibrolux. Equivalent to #125C3A & #022707.


$12.95
Click to read more
P-CF22699Filter Choke - 90 mA, for Fender® Twin, Super, Dual Showman

Replacement for Fender Twin, Super, and Dual Showman. Equivalent to #125C1A & #022699.


$13.95
Click to read more
P-T154-P-T156-XFilter Choke - Hammond, Open Bracket

Features



  • Economical "open bracket" - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.

Starting at $13.02
Note:
  • 1.5 mH / 5 A
  • 6 mH / 2 A
  • 60 mH / 2 A
  • 3 H / 100 mA
  • 3.5 H / 150 mA
  • 5 H / 75 mA
  • 9 H / 40 mA (700 ohm)
  • 60 H / 8 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-C194BChoke - Hammond, for Fender Bandmaster, Dual Showman, etc.

Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$17.86
Click to read more
P-C194AChoke - Hammond, for Fender Deluxe, Deluxe Reverb, etc.

Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb Equivalent to Manufacturer part number 125C3A & 022707 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 50 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$16.42
Click to read more
P-T193XFilter Choke - Hammond, D.C. choke, Enclosed
  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 8" long leads.
  • Units will exhibit less inductance at slightly higher currents or more at lower currents.
  • Perfect for high voltage power supply filtering, case matches power transformers & tube audio output transformers.
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
  • For more sizes and voltages (open - bracket mount type) - see P-T154-P-T156-X
  • Operating temperature range is -40C to 85C

Starting at $38.65
Partially Out of Stock
Note:
  • 0.05 H / 2 A
  • 3 H / 500 mA
  • 5 H / 500 mA
  • 10 H / 150 mA
  • 10 H / 300 mA
  • 10 H / 500 mA
  • 12 H / 100 mA
  • 20 H / 100 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-TM800-C-CEFilter Choke - Marshall Replacement, for JCM800
Replacement filter choke for Marshall JCM800s.
$24.95
Click to read more
P-C194GChoke - Hammond, Replacement for Marshall Plexi

Replacement for Marshall Plexi Specifications:



  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

$22.14
Click to read more
P-C194EChoke - Hammond, Replacement for Vox AC30 vintage
Replacement for Vox AC30 vintage
Specifications:
  • Inductance ± 15%: 30 H
  • D.C. Current: 100 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$34.36
Click to read more
P-C194CChoke - Hammond, replacement for Marshall Plexi JCM800
Replacement for Marshall Plexi JCM 800.
Specifications:
  • Inductance ± 15%: 40 H
  • D.C. Current: 50 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$35.12
Click to read more

Pages

(2 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes