You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
P-T31Transformer - Output, 8 W, Single Ended
Specifications
  • Power: 8 W
  • Primary Impedance: 5,000 Ω single-ended
  • Secondary Impedance: 8 Ω
  • Primary DC Resistance (Red to Blue): 230 Ω
  • Mounting Centers: 2.375"
  • Mounting Type: U-bracket
  • Weight: 0.7 lbs
$13.95
Click to read more
P-T1750X-FENDERTransformer - Hammond, Output, replacement for Fender
  • Replacements for Fender Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Starting at $18.44
Partially Out of Stock
Note:
  • 5W | 5k/8kΩ | 3.2/8/16Ω
  • 10W | 5482Ω | 8Ω
  • 15W | 6.95kΩ | 8Ω
  • 40W | 4kΩ | 4/8/16Ω
  • 50W | 4kΩ | 2/4/8Ω
  • 60W | 4.2kΩ | 2/4/8Ω
  • 100W | 2kΩ | 4/8/16Ω
  • 135W | 2kΩ | 4/8 Ω
are special order items.
Note: some of these items are special order items.
Click to read more
P-TF41318Transformer - Fender® Replacement, Output, 25 Watt, 8 Ohm
Replacement for Deluxe and Deluxe Reverb, 8 ohms.

Equivalent to #125A1A & #041318.
$36.24
Click to read more
P-TF50438Transformer - Fender®, Output, Hot Rod Deluxe and Blues Deluxe

Fender Original Hot Rod Deluxe and Blues Deluxe output transformer. 40 watts. Equivalent to #050438.


$41.50
Click to read more
P-TF22905Transformer - Fender® Replacement, Output, 8 W, 3.2 Ohm
Replacement for Fender Champ, VibroChamp, and Bronco amps, 4 ohms.

Equivalent to #125A35A & #022905.
$34.95
Click to read more
P-T125XTransformer - Hammond, Universal Push-Pull
  • Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits).
  • Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz).
  • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
  • Tables provided with transformer listing 90 pre-calculated impedance ratios.

Starting at $36.82
Note:
  • 5 W / 45 mA
  • 10 W / 70 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-TUBT-3Transformer - One Electron, Output, 3000 Ω to 16/8/4 Ω

The UBT-3 from One Electron is the same size and power (15 watts) as the UBT-1, but has a primary impedance suitable for single or paralleled tubes running at B+ voltages of 300 to 400 volts, such as: 2A3, WE 300B, 50, etc.


$109.95
Click to read more
P-TF49969Transformer - Output, Replacement for Blues Junior, 15 W
Fender Original Blues Junior output transformer.
Equivalent to #049969.
15 watts.
$25.15
Click to read more
P-T125XSETransformer - Hammond, Universal Single Ended
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
  • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
  • Open style with minimum 12" long primary & secondary leads leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.

Starting at $45.84
Note: 25 W / 100 mA is a special order item.
Click to read more
P-TF22848-XTransformer - Fender® Replacement, Output, 35 W

Replacement for Pro Reverb, Tremolux, Vibrolux, Bandmaster, and Vibroverb. Equivalent to #125A6A & #022848.


Starting at $43.00
Click to read more

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes