You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(37 pages)
P-T42TM022Audio and Signal Transformer
Primary: 1500 ohms center tapped.
Secondary: 600 ohms center tapped.
$2.25
Click to read more about this product.
P-RC-3Audio Choke - One Electron PRC-3, 225H for Preamp Output
The PRC-3 audio choke from One Electron was designed as a plate load for the output of either a high quality line amplifier or a phono preamp.
$69.95
Click to read more about this product.
P-H1444-12103Chassis Box - Hammond, Aluminum, 12" x 10" x 3"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-29
$27.37
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-C1536XChoke - 0.17 - 250, Heavy Duty Hash Choke
Molded powdered iron core.
1-¼ long axial leads.
High inductance & high current.
L measured at 1 Khz. Inductance: 250 µH20% tolerance
DC resistance ohms: .17
Self Resonant Frequency (MHz): 1.5
Maximum DC current amps: 2.5
Coil diameter (in): .43
Core Length (in): 1.25
$1.50
Click to read more about this product.
P-T1534AChoke - Hammond, R.F. & Hash, Iron
Features:
  • Iron core
  • Impregnated with a moisture and fungus resistant varnish.
  • Lead length of 1.5" (± 0.13")
  • Wound for low distributed capacity by using 3-Pi windings.
  • Inductance: 1 mH
  • Tolerance: 0.05
  • Q Minimum: 83
  • Test Frequency: 250 kHz
  • Self Resonant Min. Frequency: 2.6 Mhz
  • Maximum D.C. Resistance: 8.6 ohms
  • Maximum D.C. Current: 160 mA
  • Coil Diameter: 0.47"
  • Core length: 0.88"
$1.82
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-T1533HChoke - Hammond, R.F. & Hash, Phenolic
Features:
  • Phenolic core
  • Impregnated with a moisture and fungus resistant varnish.
  • Lead length of 1.5" (± 0.13")
  • Wound for low distributed capacity by using 3-Pi windings.
  • Inductance: 1 mH
  • Tolerance: 0.05
  • Q Minimum: 59
  • Test Frequency: 250 kHz
  • Self Resonant Min. Frequency: 3.7 Mhz
  • Maximum D.C. Resistance: 19 ohms
  • Maximum D.C. Current: 160 mA
  • Coil Diameter: 0.56"
  • Core length: 0.75"
$1.82
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-C194BChoke - Hammond, Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super
Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super
Equivalent to Manufacturer part number 125C1A & 022699
Specifications:
  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.
$17.69
Click to read more about this product.
P-C194AChoke - Hammond, Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb
Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb
Equivalent to Manufacturer part number 125C3A & 022707
Specifications:
  • Inductance ± 15%: 4 H
  • D.C. Current: 50 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.
$16.26
Click to read more about this product.
P-C194GChoke - Hammond, Replacement for Marshall Plexi
Replacement for Marshall Plexi
Specifications:
  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$25.91
Click to read more about this product.
P-C194CChoke - Hammond, replacement for Marshall Plexi JCM800
Replacement for Marshall Plexi JCM 800.
Specifications:
  • Inductance ± 15%: 40 H
  • D.C. Current: 50 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$34.77
Click to read more about this product.

Pages

(37 pages)
Subscribe to RSS - Transformers & Chokes