You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(33 pages)
P-C1535XRF Choke - Hammond
Multiple Options Available
Impregnated with a moisture and fungus resistant varnish. 1-1/2" long axial leads. Wound for low distributed capacity by using 3-Pi windings.

Specifications

  • Part #: P-C1535B: P-C1535J
  • Inductance: 2.5 mH, 5% tolerance: 25 mH, 5% tolerance
  • Q (min): 106: 102
  • Test Frequency: 250 KHz: 79 KHz
  • Self Resonant Min. Frequency: 1.3 MHz: 0.33 MHz
  • Maximum DC current Resistance: 9 Ω: 127 Ω
  • Maximum DC Current: 160 mA: 65 mA
  • Coil Diameter: .469": .531"
  • Core Length: .875": .875"
  • Core Material: Ferrite: Ferrite
$4.00
Out of Stock
Click to read more
P-C159VFilter Choke - Hammond, Open Bracket, 1.5 H, 500 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.


Inductance (+/- 15%) 1.5H D.C. Current 500 ma. Resistance (+/- 15%) 27 ohms Maximum Operating Volt (D.C.) 500V


$28.34
Click to read more
P-C159YFilter Choke - Hammond, Open Bracket, 0.6 H, 750 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.


Inductance (± 15%) 0.6H D.C. Current 750 ma. Resistance (± 15%) 11 ohms Maximum Operating Volt (D.C.) 500V


$28.34
Click to read more
P-C194AChoke - Hammond, for Fender Deluxe, Deluxe Reverb, etc.

Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb Equivalent to Manufacturer part number 125C3A & 022707 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 50 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$16.88
Click to read more
P-C194BChoke - Hammond, for Fender Bandmaster, Dual Showman, etc.

Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$18.36
Click to read more
P-C194CChoke - Hammond, replacement for Marshall Plexi JCM800
Replacement for Marshall Plexi JCM 800.
Specifications:
  • Inductance ± 15%: 40 H
  • D.C. Current: 50 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$36.09
Click to read more
P-C194DChoke - Hammond, Replacement for Vox AC30 reissue
Replacement for Vox AC30 reissue
Specifications:
  • Inductance ± 15%: 5 H
  • D.C. Current: 150 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$36.73
Click to read more
P-C194EChoke - Hammond, Replacement for Vox AC30 vintage
Replacement for Vox AC30 vintage
Specifications:
  • Inductance ± 15%: 30 H
  • D.C. Current: 100 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$33.54
Click to read more
P-C194GChoke - Hammond, Replacement for Marshall Plexi

Replacement for Marshall Plexi Specifications:



  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

$22.76
Click to read more
P-H1444-12103Chassis Box - Hammond, Aluminum, 12" x 10" x 3"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-29
$28.41
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more

Pages

(33 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes