You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
P-TF36958Transformer - Fender®, Power, Hot Rod Deluxe
Fender Original Hot Rod Deluxe Power Transformer. Equivalent to #036958.





Specifications



Primary
120 VAC @ 60 Hz (Black - White)


Secondary 1 (Red - Red)
495 VDC unloaded, 440 VDC @ 65.7 mA DC, 388 VDC @ 200 mA DC


Secondary 2 (Brown - Brown)
53.6 VAC @ 1.58 A AC


Secondary 3 (Green - Green)
6.6 VAC @ 3.75 A AC




Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
$58.95
$52.47
You save: 11%
Click to read more
P-T143Transformer - Hammond, Power, 350-0-350V, 70-90 mA
Custom manufactured to replace most 6 and 7 tube sets of the early 1930s. Supplied with vertical mounting shells. Provides a seperate filament winding for audio output stages.
Specifications
Rating: 350-0-350 V, 70 or 90 mA (if 5 V winding is used with 2 A rectifier)
Windings: 5 V, 3 A; 2.5 V, 7.5 A; 2.5 VCT, 3.5 A
Mounting Centers:2 x 2.625"
Weight: 4.2 lbs.
Overall Height: 3.12"
$105.95
$94.30
You save: 11%
Click to read more
P-TF49967Transformer - Fender®, Power, Blues Junior, 15 W

Fender Original Blues Junior Power Transformer. Equivalent to #049967.


$50.95
$45.35
You save: 11%
Click to read more
P-TM-P100Transformer - Marshall Replacement, Power, 100 W

100 watt replacement power transformer for Marshall. Good replacement for JMP and JCM800s for EL34! Built to vintage specs with exact interleave ratios and materials. Gives great classic sound. Great for upgrading later issue Marshall amps.


$99.95
$88.96
You save: 11%
Click to read more
P-TM-P50Transformer - Marshall Replacement, Power, 50 W

A good upgrade for later issue Marshall amplifiers. Good replacement for JMP and JCM 800s for EL34!


$86.95
$77.39
You save: 11%
Click to read more
P-T263-ZTransformer - Hammond, High Voltage Plate & Filament, Horizontal mount
  • Horizontal mount. For Vertical Mount, see P-T263-X
  • Primary 117 VAC, 50/60 Hz. - except as noted
  • Enclosed, 4 hole, chassis mount.
  • Minimum 6" long leads.
  • Units can be run full wave bridge or full wave C.T.
  • Class A insulation (105 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • Conservative designs - CSA certified (209651).
  • For Vertical Mount, see P-T263-X

$65.03
Starting at $57.88
You save: 11%
Note:
P-T270DAZ: 520 V C.T. @ 104 mA
P-T273AZ: 650 V C.T. @ 46 mA
P-T291AX: 650 V C.T. @ 81 mA
P-T273CZ: 650 V C.T. @ 172 mA
P-T273DZ: 700 V C.T. @ 103 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-TBFT-1BTransformer - One Electron, BFT-1B, Power

The BFT-1B from One Electron was designed to power a stereo amplifier using UBT-1's in each channel but will also power an 80 watt push-pull tube amplifier. The BFT-1B is slightly larger than earlier versions of the BFT-1, allowing lower flux density and cooler operation. The tapped high-voltage windings and three filament windings provide flexibility in design. An electrostatic shield between the primaries and secondaries reduces power-line noise coupling. The primary arrangements allows use on virtually any power grid in the world.


$225.00
$200.25
You save: 11%
Click to read more
P-T290-VOXTransformer - Hammond, Guitar Amplifier, replacement for Vox
  • Replacement for Vox amplifiers
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

$86.77
Starting at $77.23
You save: 11%
Click to read more
P-T300-XTransformer - Hammond, High Voltage Universal Plate & Filament, Vertical mount
  • Primary: Universal - 100, 110, 120, 200, 220,230, 240 VAC 50/60 Hz.
    • NOTE: units are designed to operate with BOTH primary windings engaged.
    • See primary wiring information under resources.
  • Bias Tap: 50 VAC tap from high voltage secondary C.T. (except part number P-T379WX - uses a separate 60VAC 0.2 Amp winding).
  • Highpot tested: 2,000 VAC
  • Faraday Copper Primary Shield: Our electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell).
  • Windings: Concentric wound for low stray field and low noise.
  • Models: This series is an upgrade from our P-T263-X range of units PLUS 2 models designed specifically for 300B tubes (Part Number P-T300BX) and 2A3 tubes (Part Number P-T302AX).
  • Finish: Black powder paint to match our P-T1650X series of output transformers Units can be run full wave bridge or full wave C.T.
  • Conservative designs - CSA certified (209651).

$66.87
Starting at $59.51
You save: 11%
Note:
P-T369AX: 250 V C.T. @ 115 mA
P-T363CX: 360 V C.T. @ 288 mA
P-T369EX: 380 V C.T. @ 75 mA
P-T369GX: 450 V C.T. @ 75 mA
P-T369JX: 500 V C.T. @ 69 mA
P-T370JX: 500 V C.T. @ 161 mA
P-T370DAX: 520 V C.T. @ 104 mA
P-T370EX: 550 V C.T. @ 144 mA
P-T370HX: 550 V C.T. @ 230 mA
P-T372DX: 600 V C.T. @ 144 mA
P-T302AX: 600 V C.T. @ 230 mA
P-T372JX: 600 V C.T. @ 288 mA
P-T376X: 640 V C.T. @ 173 mA
P-T373EX: 650 V C.T. @ 345 mA
P-T373HX: 700 V C.T. @ 403 mA
P-T378X: 800 V C.T. @ 230 mA
P-T300BX: 800 V C.T. @ 288 mA
P-T378CX: 800 V C.T. @ 534 mA
P-T379WX: 800 V C.T. @ 1.06 A
P-T382X: 1,000 V C.T. @ 230 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-TF41752Transformer - Fender®, Power, Hot Rod Deville

Fender Original Hot Rod DeVille Power Transformer. Equivalent to #041752.


$94.95
$84.51
You save: 11%
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes