You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(38 pages)
P-T374BXTransformer - Hammond, Power, 375-0-375 V, 201 mA, Univ. Primary
  • Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
  • High voltage secondary designed for full wave center tapped use.
  • 50 VAC bias tap from high voltage secondary C.T.
  • Black epoxy painted to match our P-T1650 series of output transformers.
  • Class A insulation (105 degrees C).
  • Hi-Pot tested to 2,500 VAC.
  • Windings are concentric wound for low stray field and low noise.


Secondary: 375-0-375 V, 201 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 6 A Mounting centers: 3" x 2.81" vertical mount Weight: 7


$138.56
Click to read more
P-TF22848Transformer - Fender® Replacement, Output, 35 W, 4 Ohm
Replacement for Pro Reverb, Tremolux, Vibrolux, Bandmaster, and Vibroverb, 4 ohms.

Equivalent to #125A6A & #022848.
$43.00
Click to read more
P-TF22913Transformer - Replacement for Fender®, Output, 12W, 8Ω
Generic replacement for Fender Princeton Reverb, Tweed Deluxe, 8 ohms. Transformer is not manufactured by Fender, but is equivalent to #125A10B & #022913.




Specifications


Audio Power
12 W (RMS)


Primary Impedance
8,000 Ω


Secondary Impedance
8 Ω


Mounting Centers
2.875"


Mounting Type
Vertical


Weight
1.0 lbs




Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
$39.95
Click to read more
P-TM-P50Transformer - Marshall Replacement, Power, 50 W

A good upgrade for later issue Marshall amplifiers. Good replacement for JMP and JCM 800s for EL34!


$86.95
Click to read more
P-T159TFilter Choke - Hammond, Open Bracket, 2.5 H, 300 mA
  • Inductance: 2.5 H
  • D.C. Current: 300 mA
  • Resistance: 43 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$27.36
Click to read more
P-H1600-ASwitch - Rotary Impedance Selector, for Hammond 1600A series

Includes: 3 pole, 3 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G) (See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)


$11.95
Click to read more
P-T124DTransformer - Hammond, Audio Interstage, 7K PRI, 15.8K SEC
  • Designed for general purpose or replacement use in single ended or phase inverter tube driver circuits.
  • Open style 2 point mount with minimum 5" long primary leads.
  • Core material is Grain Oriented Silicon Steel.
  • Operates in the 150 Hz - 15 KHz range.

Specifications
Primary Impedance
7,000 Ω CT
Secondary Impedance
15,800 Ω CT
Output Power
5 W
Primary DC Resistance (Blue-Red)
218 Ω
Primary DC Resistance (Red-Brown)
236 Ω
Secondary DC Resistance (Green-Black)
297 Ω
Secondary DC Resistance (Black-Green)
394 Ω
Primary Inductance
6.45 H
Secondary Induct
$38.60
Click to read more
P-T166L5Transformer - Hammond, Filament, 5 VCT, 2 A
  • Primary 115 VAC, 60 Hz
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)


Specifications Rating: 5 VCT, 2 A Mounting Centers: 2-1/8", u-bracket


$20.56
Click to read more
P-T1750JTransformer - Hammond, Output replacement for Fender, 35W 4kΩ

Replacement for Pro-Reverb, Tremolux, Vibrolux Equivalent to manufacturer part number #125A6A and #022848 Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here. Specifications:


























Primary: 4,000 C.T.Ω
Secondary:
Power: 35 W
Amp Type: Push-Pull
Coil Type: Plastic Bobbin


Features:



  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".

$50.37
Click to read more
P-T159SFilter Choke - Hammond, Open Bracket, 4 H, 225 mA
  • Inductance: 4 H
  • D.C. Current: 225 mA
  • Resistance: 65 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$27.30
Click to read more

Pages

(38 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes