You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
P-T266PA6Transformer - Hammond, Power, Low voltage, 6.3V/6A

Special Order Item

Specifications:



  • Size: 37.8 VA
  • Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
  • Secondary VAC RMS Series: 6.3V @ 6 A
  • Secondary VAC RMS Parallel: 3.15V @ 12 A


Features:



  • Primary 117/234 VAC, 50/60 Hz.
  • Dual secondaries
  • Secondaries can be used as; a center tapped secondary, parallel connected or used individually
  • Units are designed for use with all windings engaged.
  • Open style.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C) for e

$47.73
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T850LATransformer - Hammond, Audio Broadcast Quality

Special Order Item

Output to Line, Matching or Bridging
  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware.
  • Sealed case and wax potted core internally for stable characteristics and long life.
  • Wide frequency response ± 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.)
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance.
  • Distortion is apx. 1.5% @ 20 Hz.
$146.22
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T145BTransformer - Hammond, Audio driver, 145B

Special Order Item

Audio TX driver, chassis mount.

  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (± 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
  • Primary: 600 ohms
  • Secondary: 600 ohms
  • Primary D.C.: 18 mA
  • D.C. Resistance (±15%): 30 ohms primary, 38 ohms secondary
  • Output: 200 mW
$21.98
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T166U7Transformer - Hammond, Low Voltage / Filament, Open, 7.5 VCT

Special Order Item

  • Primary 115 VAC, 60 Hz.
  • Secondary 7.5 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).

$61.37
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T262F12Transformer - Hammond, Plate & Filament or Bias, 12.6V auxiliary

Special Order Item

  • Primary 115 VAC, 60 Hz.
  • Designed for small power or bias supplies, test equipment, preamps etc.
  • Economical , two hole, channel bracket, chassis mount.
  • Minimum 5" long leads.
  • Convenient 12.6 filament/auxiliary winding.

$39.75
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T182L6Transformer - Hammond, Toroidal Power, Chassis Mount, 30VA

Special Order Item

Specifications



  • VA: 30
  • VAC Secondary (RMS) Series: 12V C.T. @ 2.5A
  • VAC Secondary (RMS) Parallel: 6V @ 5A


Features:



  • Dual Secondary
  • Open Toroid Center
  • Low profile, lightweight, cool running - due to high efficiency toroidal design
  • Dual 117/234 VAC primary, 50/60 Hz.

$68.17
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T167L60Transformer - Hammond, Low Voltage / Filament, Enclosed, 60 VCT

Special Order Item

  • Primary 115 VAC, 60 Hz.
  • Secondary 60 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).

$65.90
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T850HAAudio Transformer - Hammond, 150/600Ω, Line Isolation

Special Order Item

  • 150/600 Ohm Primary Impedance
  • 300/1200 Ohm Secondary Impedance
  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware.
  • Sealed case and wax potted core internally for stable characteristics and long life.
  • Wide frequency response ± 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.)
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance.
  • Distortion is apx. 1.5% @ 20 Hz. under full power.
  • Electrostatic shield between pri. & sec. connected to the green lead.
  • Humbucking construction
  • Balanced split windings on pri. & sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching.
  • Lead length: Min. 4"

$146.22
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T166F30Transformer - Hammond, Low Voltage / Filament, Open, 30 VCT

Special Order Item

  • Primary 115 VAC, 60 Hz.
  • Secondary 30 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).

$25.00
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T109LTransformer - Hammond, 2W Audio Miniature Epoxy Potted

Special Order Item

Features:
  • Perfect for audio input, line matching, isolation or output transformer applications.
  • 2 watt (± 1.5 db, 300Hz. - 50 KHz.).
  • Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187" length).
  • Power level ratings are maximum at lowest frequency rating
  • Power can be increased slightly at higher frequencies.
  • Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
$33.14
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes