You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(38 pages)
P-T372FXTransformer - Hammond, Power, 300-0-300 V, 173 mA
  • Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
  • High voltage secondary designed for full wave center tapped use.
  • 50 VAC bias tap from high voltage secondary C.T.
  • Black epoxy painted to match our P-T1650 series of output transformers .
  • Class A insulation (105 degrees C).
  • Hi-Pot tested to 2,500 VAC.
  • Windings are concentric wound for low stray field and low noise.
Secondary: 300-0-300 V, 173 mA
Filament winding 1 : 5 VCT, 3 A
Filament winding 2 : 6.3 VCT, 5 A
Mounting centers: 2.5" x 2.94" vertical mount
Weight
$125.62
Click to read more
P-T157GFilter Choke - Hammond, Open Bracket, 30 H, 40 mA
  • Inductance: 30 H
  • D.C. Current: 40 mA
  • Resistance: 595 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$25.27
Click to read more
P-T1650ETransformer - Hammond, Tube Out, Easy Secondary, 15W 8kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

$112.58
Click to read more
P-T1650TTransformer - Hammond, Tube Output, Push-Pull, 120W 1.9kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

$149.95
Click to read more
P-T167U6Transformer - Hammond, Filament, 6.3 VCT, 16 A

Specifications



  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 16 A
  • Mounting Centers: 2" x 2.19", vertical


Key Features



  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)

$58.33
Click to read more
P-T1750WTransformer - Hammond, Output replacement for Fender, 100W 2kΩ

Replacement for Dual Showman, Twin Reverb Equivalent to manufacturer part number #125A29A and #022889 Warning: Not all amplifier models of the same name use the same transformer model.


$93.48
Click to read more
P-T125HTransformer - Hammond, Output, 8 W, 10k Primary

Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187


$37.00
Click to read more
P-T1650FTransformer - Hammond, Tube Output, Push-Pull, 25W 7.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

$109.25
Click to read more
P-T1650KTransformer - Hammond, Tube Output, Push-Pull, 50W 3.4kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$133.49
Click to read more
P-T1750LTransformer - Hammond, Output replacement for Fender, 50W 4.2kΩ

Replacement for Bassman Equivalent to manufacturer part number #125A13A and #022871 Warning: Not all amplifier models of the same name use the same transformer model.


$77.60
Click to read more

Pages

(38 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes