You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
P-T292Transformer - Power
  • Primary Voltage: 120 V
  • Secondary 1: 140 V @ 100 mA
  • Secondary 2: 28 V @ 20 mA
  • Secondary 3: 10.5 V @ 2 A

Primary voltage = black wires Secondary 1 = Red wires Secondary 2 = Yellow wires Secondary 3 = Green wires
$19.95
Click to read more
S-H135Form - Ceramic, 2-½" x ½" Diameter, 6-32 Threads

Use as a standoff, coil/choke form, or antenna coil.


$0.20
Click to read more
P-T193XFilter Choke - Hammond, D.C. choke, Enclosed
  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 8" long leads.
  • Units will exhibit less inductance at slightly higher currents or more at lower currents.
  • Perfect for high voltage power supply filtering, case matches power transformers & tube audio output transformers.
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
  • For more sizes and voltages (open - bracket mount type) - see P-T154-P-T156-X
  • Operating temperature range is -40C to 85C

Starting at $38.65
Partially Out of Stock
Note:
  • 0.05 H / 2 A
  • 3 H / 500 mA
  • 5 H / 500 mA
  • 10 H / 150 mA
  • 10 H / 300 mA
  • 10 H / 500 mA
  • 12 H / 100 mA
  • 20 H / 100 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-T119DATransformer - Hammond, Audio Interstage, 12 Watt

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e.


$30.16
Click to read more
P-T166X-5Transformer - Hammond, Low Voltage / Filament, Open, 5 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 5 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).

Starting at $20.56
Note: 8 A is a special order item.
Click to read more
P-TF22905Transformer - Fender® Replacement, Output, 8 W, 3.2 Ohm
Replacement for Fender Champ, VibroChamp, and Bronco amps, 4 ohms.

Equivalent to #125A35A & #022905.
$34.95
Click to read more
P-T125XTransformer - Hammond, Universal Push-Pull
  • Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits).
  • Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz).
  • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
  • Tables provided with transformer listing 90 pre-calculated impedance ratios.

Starting at $36.82
Note:
  • 5 W / 45 mA
  • 10 W / 70 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-TF47609Transformer - Fender® Replacement, Power Stand Alone Reverb

For stand alone 1963 Fender® Reverb Made in USA.


$25.95
Click to read more
P-TUBT-3Transformer - One Electron, Output, 3000 Ω to 16/8/4 Ω

The UBT-3 from One Electron is the same size and power (15 watts) as the UBT-1, but has a primary impedance suitable for single or paralleled tubes running at B+ voltages of 300 to 400 volts, such as: 2A3, WE 300B, 50, etc.


$109.95
Click to read more
P-T290-FENDERTransformer - Hammond, Guitar Amplifier, replacement for Fender

Replacement for Fender Champ, Vibro Champ, Princeton, Princeton Reverb, Tweed Deluxe Equivalent to Fender part number 125P1B & 022772 Primary:120 VAC, 60 Hz. For 240V version, see P-T290AEX Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Plastic Core
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".


Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.


Starting at $41.00
Note:
  • '65 Twin Reverb Reissue - 120 V
  • Bassman 70 Classic - 120 V
  • Bassman, Concert, Pro - 240 V
  • Super Reverb, Pro Reverb - 240 V
  • Twin Reverb, Dual Showman - 240 V
  • Vibrolux, Vibrolux Reverb - 240 V
are special order items.
Note: some of these items are special order items.
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes