You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(19 pages)
P-TN-68XTransformer - Isolation, 50 VA, 115V, 435 mA, 2 x 115V

An Isolation Power Transformer for isolating equipment from direct connection to the power line. The transformer is constructed with non-concentrically wound coils. The primary and secondary are wound on separate arbors, then assembled on a laminate core side-by-side separated by insulation. This prevents electrical connection, under normal or overload conditions, between the primary and secondary windings.


$15.95
Click to read more
P-T187E12Transformer - Hammond, Low Voltage, Dual Primary, 12.6V 4A

Special Order Item

Secondary VAC: 12.6V C.T.
Current: 4 A
VA Rating: 50.4
Features:
  • Dual Primary 115/230VAC
  • Operates on 50/60 Hz.
  • Combination solder or quick connect terminals.
  • Split bobbin construction eliminates the need for an electrostatic shield.
  • Hi-pot tested to 2 KV RMS.
  • Economical open style, channel frame - chassis mount design
  • UL recognized & CSA certified.
$16.11
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-C194AChoke - Hammond, for Fender Deluxe, Deluxe Reverb, etc.

Replacement for Fender Deluxe, Deluxe Reverb, Vibrolux, Vibrolux Reverb Equivalent to Manufacturer part number 125C3A & 022707 Specifications: Inductance ± 15% 4 H D.C. Current 50 mA Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

$16.42
Click to read more
P-T166-2Transformer - Hammond, Low Voltage / Filament, Open, 2.5 VCT
  • Open style, chassis mount transformers with a 115V 60Hz primary and a 2.5V center tapped secondary.

Starting at $16.44
Note:
P-T166F2: 0.63
P-T166G2: 1.25
P-T166J2: 2.5
P-T166K2: 3.75
are special order items.
Note: some of these items are special order items.
Click to read more
P-T166-25-NOTAPTransformer - Hammond, Low Voltage / Filament, Open, 25 V no tap

Special Order Item

Open style, chassis mount transformers with a 117V 50/60Hz primary and a 25V secondary.


$16.70
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T156Transformer - Audio Interstage, 10 mA

Equivalent to Stancor A53-C. 1:3 ratio overall. Center tapped secondary may be used for push-pull grids.Specifications Max. Primary Current: 10 mA Impedance Primary to Secondary (Ohms): 10,000 to 90,000


$16.95
Click to read more
P-C194BChoke - Hammond, for Fender Bandmaster, Dual Showman, etc.

Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:



  • Inductance ± 15%: 4 H
  • D.C. Current: 90 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs.

$17.86
Click to read more
P-T144-XTransformer - Hammond, 144 Series, Audio Chassis Mount

Special Order Item

Features:



  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

$18.14
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T145-XTransformer - Hammond, 145 Series, Audio Chassis Mount

Features:



  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

$18.14
Note:
P-T145D: 200kΩ / 1kΩ
P-T145A: 100Ω / 200Ω
P-T145O: 15kΩ / 200Ω
P-T145P: 20kΩ / 1kΩ
P-T145R: 20kΩ / 2kΩ
P-T145G: 2kΩ / 200Ω
P-T145H: 2kΩ / 500Ω
P-T145L: 4kΩ / 2.6kΩ
P-T145C: 50kΩ / 1.5kΩ
P-T145F: 600Ω / 200Ω
P-T145E: 600Ω / 600Ω ct
are special order items.
Note: some of these items are special order items.
Click to read more
P-T146-XTransformer - Hammond, 146 Series, Audio Chassis Mount

Special Order Item

Features:



  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 3" long minimum
  • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

$18.14
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more

Pages

(19 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes