You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(31 pages)
P-T261G6Transformer - Hammond, Plate & Filament or Bias, 250V@130mA
Specifications:
  • Primary: 115 VAC, 125 VAC, 60 Hz.
  • Secondary #1: 250 VCT @ 130 mA
  • Filament Secondary #2: 6.3 V @ 2 A
  • Mounting Centers: 3.56" u-bracket
  • Weight: 2 lbs.
Features:
  • Primary 115 VAC, 60 Hz.
  • Designed for small power or bias supplies, test equipment, preamps etc.
  • Can also be used with full wave C.T. rectifiers.
  • Economical , two hole, channel bracket, chassis mount.
  • Minimum 5" long leads.
  • Convenient 6.3 or 12.6 volt filament/auxiliary winding.
$42.32
$38.09
You save: 10%
Click to read more about this product.
P-T193KFilter Choke - Hammond, Enclosed, 2.6 H, 300 mA

Specifications



  • Inductance: 2.6 H
  • D.C. Current: 300 mA
  • Resistance: 21 Ω
  • Max. Voltage: 800 VDC


Features:



  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.

$54.30
$48.87
You save: 10%
Click to read more about this product.
P-T290CXTransformer - Hammond, 120V for Vibrolux, Vibrolux Reverb, etc.

Replacement for Fender Vibrolux, Vibrolux Reverb, Tremolux Equivalent to Fender part number 125P26A & 022723 Primary:120 VAC, 60 Hz. For 240V version, see P-T290CEX Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".


Warning: Not all amplifier models of the same name use the same transformer model.


$78.93
$71.04
You save: 10%
Click to read more about this product.
P-T290DEXTransformer - Hammond, 240V for Super Reverb, Pro Reverb, etc.

Replacement for Fender Super Reverb, Pro Reverb, Bandmaster Reverb, Tweed Bassman Equivalent to Fender part number 125P5D & 022798 Primary:240 VAC, 50 Hz. For 120V version, see P-T290DX Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".


Warning: Not all amplifier models of the same name use the same transformer model.


$118.10
$106.29
You save: 10%
Click to read more about this product.
P-T1750CTransformer - Hammond, Output replacement for Fender, 5W 7kΩ

Replacement for Champ, Vibro-Champ, Bronco Equivalent to manufacturer part number #125A35A and #022905 Warning: Not all amplifier models of the same name use the same transformer model.


$30.77
$27.69
You save: 10%
Click to read more about this product.
P-T1750UTransformer - Hammond, Output for Marshall, 100W 1.7kΩ
Replacement for JMP, JCM800
Specifications
  • Primary: 1,700 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 100 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$107.69
$96.92
You save: 10%
Click to read more about this product.
P-T290CEXTransformer - Hammond, 240V for Vibrolux, Vibrolux Reverb, etc.
Replacement for Fender Vibrolux, Vibrolux Reverb, Tremolux
Equivalent to Fender part number 125P26A & 022723
Primary:240 VAC, 50 Hz.
For 120V version, see P-T290CX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$94.70
$85.23
You save: 10%
Click to read more about this product.
P-T262F6Transformer - Hammond, Plate & Filament or Bias, 120V@140mA
Specifications:
  • Primary: 115 VAC, 125 VAC, 60 Hz.
  • Secondary #1: 120 V @ 140 mA
  • Filament Secondary #2: 6.3 V @ 1.5 A
  • Mounting Centers: 3.13" u-bracket
  • Weight: 1.7 lbs.
Features:
  • Primary 115 VAC, 60 Hz.
  • Designed for small power or bias supplies, test equipment, preamps etc.
  • Economical , two hole, channel bracket, chassis mount.
  • Minimum 5" long leads.
$31.37
$28.23
You save: 10%
Click to read more about this product.
P-T1750QTransformer - Hammond, Output for Marshall, 50W 7371Ω
Replacement for JTM45
Specifications
  • Primary: 7,371 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$95.05
$85.55
You save: 10%
Click to read more about this product.
P-T290PXTransformer - Hammond, Classic replacement for Vox AC15
Replacement for Vox AC15
Primary: 120/240 VAC, 50/60 Hz
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$92.45
$83.21
You save: 10%
Click to read more about this product.

Pages

(31 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes