You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
P-H1600-ASwitch - Rotary Impedance Selector, for Hammond 1600A series

Includes: 3 pole, 3 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G) (See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)


$11.95
Click to read more
P-T124XTransformer - Hammond, Audio Interstage, 5 Watt
  • Designed for general purpose or replacement use in push-pull or phase inverter tube driver circuits.
  • Should not be used for single ended applications. They have no gap for DC bias current present in SE mode.
  • Open style with minimum 5" long primary leads.
  • Minimum frequency response 150 Hz. - 15 Khz (+/- 1db max. ref. 1 Khz.) at full rated power.
  • Core material is Grain Oriented Silicon Steel.

Starting at $38.60
Click to read more
P-T1650XTransformer - Hammond, Tube Output, Push-Pull
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

Starting at $85.25
Note: P-T1650W: 280 W / 1.9 kΩ is a special order item.
Click to read more
P-T125HTransformer - Hammond, Output, 8 W, 10k Primary

Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187


$37.00
Click to read more
P-T263-ZTransformer - Hammond, High Voltage Plate & Filament, Horizontal mount
  • Horizontal mount. For Vertical Mount, see P-T263-X
  • Primary 117 VAC, 50/60 Hz. - except as noted
  • Enclosed, 4 hole, chassis mount.
  • Minimum 6" long leads.
  • Units can be run full wave bridge or full wave C.T.
  • Class A insulation (105 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • Conservative designs - CSA certified (209651).
  • For Vertical Mount, see P-T263-X

$67.25
Starting at $65.03
You save: 3%
Partially Out of Stock
Note:
P-T270DAZ: 520 V C.T. @ 104 mA
P-T273AZ: 650 V C.T. @ 46 mA
P-T291AX: 650 V C.T. @ 81 mA
P-T273CZ: 650 V C.T. @ 172 mA
P-T273DZ: 700 V C.T. @ 103 mA
are special order items.
Note: some of these items are special order items.
Click to read more
P-TBFT-1BTransformer - One Electron, BFT-1B, Power

The BFT-1B from One Electron was designed to power a stereo amplifier using UBT-1's in each channel but will also power an 80 watt push-pull tube amplifier. The BFT-1B is slightly larger than earlier versions of the BFT-1, allowing lower flux density and cooler operation. The tapped high-voltage windings and three filament windings provide flexibility in design. An electrostatic shield between the primaries and secondaries reduces power-line noise coupling. The primary arrangements allows use on virtually any power grid in the world.


$225.00
Click to read more
P-TF36485Transformer - Fender®, Output, 50 W, 2 Ω

Fender® Original '59 Bassman Reissue output transformer. Equivalent to #036485.


$51.95
Click to read more
P-T167X-6D3Transformer - Hammond, Low Voltage / Filament, Enclosed, 6.3 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 6.3 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).

Starting at $38.17
Note:
P-T167N6: 4 A
P-T167T6: 12 A
are special order items.
Note: some of these items are special order items.
Click to read more
P-C194EChoke - Hammond, Replacement for Vox AC30 vintage
Replacement for Vox AC30 vintage




Inductance ± 15%
30 H


D.C. Current
100 mA




Features:

  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$34.36
Click to read more
P-T1750X-MARSHALLTransformer - Hammond, Output, replacement for Marshall
  • Replacements for Marshall Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Starting at $37.50
Note:
P-T1750NA: 30-60W | 6kΩ | 8/16 Ω
P-T1750P: 50W | 126/500/2kΩ | 2/4/8/16Ω
P-T1750X: 100W | 126/500/2kΩ | 2/4/8/16Ω
are special order items.
Note: some of these items are special order items.
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes