You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(36 pages)
P-T290BEXTransformer - Hammond, 240V for Deluxe, Deluxe Reverb
Replacement for Fender Deluxe, Deluxe Reverb
Equivalent to Fender part number 125P23D & 041316
Primary:240 VAC, 50 Hz.
For 120V version, see P-T290BX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$88.76
$79.88
You save: 10%
Click to read more about this product.
P-T159PFilter Choke - Hammond, Open Bracket, 10 H, 125 mA
  • Inductance: 10 H
  • D.C. Current: 125 mA
  • Resistance: 155 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$27.81
$25.03
You save: 10%
Click to read more about this product.
P-T193DFilter Choke - Hammond, Enclosed, 8 H, 150 mA

Specifications



  • Inductance: 8 H
  • D.C. Current: 150 mA
  • Resistance: 75 Ω
  • Max. Voltage: 600 VDC


Features:



  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.

$47.91
$43.12
You save: 10%
Click to read more about this product.
P-TF37099Transformer - Fender, Reverb, for Pro Reverb

Original Fender® reverb driver for Pro Reverb.


$8.95
$8.06
You save: 10%
Click to read more about this product.
P-TF26478Transformer - Fender®, Output, for Tone Master

Fender® Original Tone Master output transformer. Equivalent to #026478.


$85.00
$76.50
You save: 10%
Click to read more about this product.
P-T290AEXTransformer - Hammond, 240V for Champ, Princeton, etc.
Replacement for Fender Champ, Vibro Champ, Princeton, Princeton Reverb, Tweed Deluxe
Equivalent to Fender part number 125P1B & 022772
Primary:240 VAC, 50 Hz.
For 120V version, see P-T290AX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$77.66
$69.89
You save: 10%
Click to read more about this product.
P-T1620Transformer - Hammond, Tube Output, Push-Pull, 20W 6.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

$100.00
$90.00
You save: 10%
Click to read more about this product.
P-T261G6Transformer - Hammond, Plate & Filament or Bias, 250V@130mA
Specifications:
  • Primary: 115 VAC, 125 VAC, 60 Hz.
  • Secondary #1: 250 VCT @ 130 mA
  • Filament Secondary #2: 6.3 V @ 2 A
  • Mounting Centers: 3.56" u-bracket
  • Weight: 2 lbs.
Features:
  • Primary 115 VAC, 60 Hz.
  • Designed for small power or bias supplies, test equipment, preamps etc.
  • Can also be used with full wave C.T. rectifiers.
  • Economical , two hole, channel bracket, chassis mount.
  • Minimum 5" long leads.
  • Convenient 6.3 or 12.6 volt filament/auxiliary winding.
$42.32
$38.09
You save: 10%
Click to read more about this product.
P-T193KFilter Choke - Hammond, Enclosed, 2.6 H, 300 mA

Specifications



  • Inductance: 2.6 H
  • D.C. Current: 300 mA
  • Resistance: 21 Ω
  • Max. Voltage: 800 VDC


Features:



  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.

$54.30
$48.87
You save: 10%
Click to read more about this product.
P-T290CXTransformer - Hammond, 120V for Vibrolux, Vibrolux Reverb, etc.

Replacement for Fender Vibrolux, Vibrolux Reverb, Tremolux Equivalent to Fender part number 125P26A & 022723 Primary:120 VAC, 60 Hz. For 240V version, see P-T290CEX Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".


Warning: Not all amplifier models of the same name use the same transformer model.


$78.93
$71.04
You save: 10%
Click to read more about this product.

Pages

(36 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes