You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(36 pages)
P-T159PFilter Choke - Hammond, Open Bracket, 10 H, 125 mA
  • Inductance: 10 H
  • D.C. Current: 125 mA
  • Resistance: 155 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.
$27.81
Click to read more about this product.
P-T193DFilter Choke - Hammond, Enclosed, 8 H, 150 mA
Specifications
  • Inductance: 8 H
  • D.C. Current: 150 mA
  • Resistance: 75 Ω
  • Max. Voltage: 600 VDC
Features:
  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.
$47.91
Click to read more about this product.
P-TF36958Transformer - Fender®, Power, Hot Rod Deluxe

Fender Original Hot Rod Deluxe Power Transformer. Equivalent to #036958.


$58.95
Click to read more about this product.
P-TF37099Transformer - Fender, Reverb, for Pro Reverb

Original Fender® reverb driver for Pro Reverb.


$8.95
Click to read more about this product.
P-TF26478Transformer - Fender®, Output, for Tone Master

Fender® Original Tone Master output transformer. Equivalent to #026478.


$85.00
Click to read more about this product.
P-T290AEXTransformer - Hammond, 240V for Champ, Princeton, etc.
Replacement for Fender Champ, Vibro Champ, Princeton, Princeton Reverb, Tweed Deluxe
Equivalent to Fender part number 125P1B & 022772
Primary:240 VAC, 50 Hz.
For 120V version, see P-T290AX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$77.66
Click to read more about this product.
P-T1620Transformer - Hammond, Tube Output, Push-Pull, 20W 6.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$100.00
Click to read more about this product.
P-T261G6Transformer - Hammond, Plate & Filament or Bias, 250V@130mA
Specifications:
  • Primary: 115 VAC, 125 VAC, 60 Hz.
  • Secondary #1: 250 VCT @ 130 mA
  • Filament Secondary #2: 6.3 V @ 2 A
  • Mounting Centers: 3.56" u-bracket
  • Weight: 2 lbs.
Features:
  • Primary 115 VAC, 60 Hz.
  • Designed for small power or bias supplies, test equipment, preamps etc.
  • Can also be used with full wave C.T. rectifiers.
  • Economical , two hole, channel bracket, chassis mount.
  • Minimum 5" long leads.
  • Convenient 6.3 or 12.6 volt filament/auxiliary winding.
$42.32
Click to read more about this product.
P-T193KFilter Choke - Hammond, Enclosed, 2.6 H, 300 mA
Specifications
  • Inductance: 2.6 H
  • D.C. Current: 300 mA
  • Resistance: 21 Ω
  • Max. Voltage: 800 VDC
Features:
  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.
$54.30
Click to read more about this product.
P-T290CXTransformer - Hammond, 120V for Vibrolux, Vibrolux Reverb, etc.
Replacement for Fender Vibrolux, Vibrolux Reverb, Tremolux
Equivalent to Fender part number 125P26A & 022723
Primary:120 VAC, 60 Hz.
For 240V version, see P-T290CEX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$78.93
Click to read more about this product.

Pages

(36 pages)
Subscribe to RSS - Transformers & Chokes