You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(38 pages)
P-TF36958Transformer - Fender®, Power, Hot Rod Deluxe
Fender Original Hot Rod Deluxe Power Transformer. Equivalent to #036958.





Specifications



Primary
120 VAC @ 60 Hz (Black - White)


Secondary 1 (Red - Red)
495 VDC unloaded, 440 VDC @ 65.7 mA DC, 388 VDC @ 200 mA DC


Secondary 2 (Brown - Brown)
53.6 VAC @ 1.58 A AC


Secondary 3 (Green - Green)
6.6 VAC @ 3.75 A AC




Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
$58.95
$53.06
You save: 10%
Click to read more
P-T290BXTransformer - Hammond, 120V for Deluxe, Deluxe Reverb

Replacement for Fender Deluxe, Deluxe Reverb Equivalent to Fender part number 125P23D & 041316 Primary:120 VAC, 60 Hz. For 240V version, see P-T290BEX Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Paper Core
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".


Warning: Not all amplifier models of the same name use the same transformer model.


$77.32
$69.59
You save: 10%
Click to read more
P-T166N12Transformer - Hammond, Filament, 12.6 VCT, 4 A
  • Primary 115 VAC, 60 Hz
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
  • Specifications Rating: 12.6 VCT, 4 A Mounting Centers: 3-1/8", u-bracket

$24.67
$22.20
You save: 10%
Click to read more
P-T274BXTransformer - Hammond, Power, 375-0-375 V, 201 mA

Specifications:



  • Size: 198 VA
  • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
  • A.C. High Voltage Secondary RMS: 750V.C.T. @ 201mA
  • Filament Winding #1: 5 V C.T. @ 3 A
  • Filament Winding #2: 6.3 V C.T.

$103.27
$92.94
You save: 10%
Click to read more
P-T154MFilter Choke - Hammond, Open Bracket, 2 H, 100 mA
  • Inductance: 2 H
  • D.C. Current: 100mA
  • Resistance: 175 ohms
  • Maximum Operating Voltage: 300 V
Features
  • Economical "open bracket" - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5" long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
  • Part No.: Inductance ± 15%: D.C.
  • $13.02
    $11.72
    You save: 10%
    Click to read more
    P-C194GChoke - Hammond, Replacement for Marshall Plexi

    Replacement for Marshall Plexi Specifications:



    • Inductance ± 15%: 3 H
    • D.C. Current: 250 mA


    Features:



    • Designed for drop in replacement of original units.
    • Physically, parts were designed to look similar to original factory units (where possible).
    • Inductances measured at rated D.C. current.
    • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
    • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

    $22.14
    $19.93
    You save: 10%
    Click to read more
    P-T370BXTransformer - Hammond, Power, 275-0-275 V, 58 mA
    • Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
    • High voltage secondary designed for full wave center tapped use.
    • 50 VAC bias tap from high voltage secondary C.T.
    • Black epoxy painted to match our P-T1650 series of output transformers .
    • Class A insulation (105 degrees C).
    • Hi-Pot test of 2,000 V RMS.
    • Windings are concentric wound for low stray field and low noise.


    Secondary: 275-0-275 V, 58 mA Filament winding 1: 5 VCT, 2 A Filament winding 2: 6.3 VCT, 2 A Mounting centers: 2" x 1.94" vertical mount Weight: 2.96 lbs.


    $82.95
    $74.66
    You save: 10%
    Click to read more
    P-T270FXTransformer - Hammond, Power, 275-0-275 V, 173 mA

    Specifications:



    • Size: 138 VA
    • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
    • A.C. high Voltage Secondary RMS: 550V.C.T. @ 173mA
    • Filament Winding #1: 5 V @ 3 A
    • Filament Winding #2: 6.3 V.C.T.

    $80.90
    $72.81
    You save: 10%
    Click to read more
    P-T272FXTransformer - Hammond, Power, 300-0-300 V, 172 mA

    Specifications:



    • Size: 146 VA
    • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
    • A.C. High Voltage Secondary RMS: 600V.C.T. @ 172mA
    • Filament Winding #1: 5 V C.T. @ 3 A
    • Filament Winding #2: 6.3 V C.T.

    $93.03
    $83.73
    You save: 10%
    Click to read more
    P-T125CSETransformer - Hammond, Universal Single Ended, 8 W, 60 mA
    • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
    • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz).
    • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
    • Open style with minimum 12" long primary & secondary leads leads.
    • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation.
    • Primary impedance range from 2,500 to 10,000 Ohms.
    • Secondary impedance range from 4 to 32 Ohms.

    $49.86
    $44.87
    You save: 10%
    Click to read more

    Pages

    (38 pages)
    Don't see a product you're looking for? Send us your product suggestions!
    Subscribe to RSS - Transformers & Chokes