Transformers & Chokes
Transformer - Hammond, Low Voltage / Filament, Open, 16 VCT
Special Order Item
- Open style, chassis mount transformers with a 115V 60Hz primary and a 16V center tapped secondary.
Starting at $15.50
Transformer - Hammond, Low Voltage / Filament, Open, 100 VCT
Open style, chassis mount transformers with a 115V 60Hz primary and a 100V center tapped secondary.
$44.80
Transformer - Fender®, Output, Hot Rod Deluxe and Blues Deluxe
Fender Original Hot Rod Deluxe and Blues Deluxe output transformer. 40 watts. Equivalent to #050438.
$59.95
Transformer - Fender, Power, for Deluxe Reverb 120V
Genuine Fender power transformer designed for use in the ‘65 Deluxe Reverb as well as the ‘68 Deluxe. Made to original fender specifications. 120V Primary
$105.95
Transformer - Output, 5W, 5k & 8k Primary Options, Upgrade for Fender® Champ
Output transformer upgrade for the Fender® part numbers 125A35A, 125A3A, and 022905 as used in the:
This upgraded transformer features both 4 ohm and 8 ohm taps on the secondary. The primary has two impedance options for lower voltage (5K) and higher voltage (8k) models.
- Bronco (AA764, AB764, Blackface, Silverface)
- Champ (Tweed, 5C1, 5E1, 5F1, AA764, Blackface, Silverface, Vibro Blackface)
- Harvard (6G10)
- Princeton (Tweed, 5B2, 5C2, 5D2, 5E2, 5F2, 5F2A)
This upgraded transformer features both 4 ohm and 8 ohm taps on the secondary. The primary has two impedance options for lower voltage (5K) and higher voltage (8k) models.
$19.95
Transformer - Hammond, Toroidal Power, 15V / 30V secondary
Dual 117/234 VAC primary, 50/60 Hz. operation. 30 V series, 15 V parallel secondary.
Starting at $61.85
Transformer - Hammond, Plate & Filament or Bias, 6.3 V auxiliary
- Primary 115 VAC, 60 Hz.
- Designed for small power or bias supplies, test equipment, preamps etc.
- Models P-T261C6, P-T261E6, and P-T261G6 can also be used with full wave C.T. rectifiers.
- Economical , two hole, channel bracket, chassis mount.
- Minimum 5" long leads.
- Convenient 6.3 filament/auxiliary winding.
Starting at $40.25
Transformer - Hammond, Power, Low voltage, 16V/3A
Specifications:
Features:
- Size: 48 VA
- Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
- Secondary VAC RMS Series: 16V @ 3 A
- Secondary VAC RMS Parallel: 8V @ 6 A
Features:
- Primary 117/234 VAC, 50/60 Hz.
- Dual secondaries
- Secondaries can be used as; a center tapped secondary, parallel connected or used individually
- Units are designed for use with all windings engaged.
- Open style.
- Minimum 6" long leads.
- Dual bobbin design - no electrostatic shield required.
- Class B insulation (130 degrees, C) for extra pr
$44.30
Transformer - Hammond, Low Voltage / Filament, Open, 24 V no tap
Special Order Item
Open style, chassis mount transformers with a 117V 50/60Hz primary and a 24V secondary.
$23.22
Transformer - Hammond, Isolation, 115V
- Primary 115VAC, 60 Hz.
- Secondary 115VAC
- Electrostatic shield between primary & secondary
- Connection by flexible leads, 8" minimum length
- Perfect for circuit isolation or "Classic" bias power supply
- CSA certified (209651)
- Remember - These units do NOT convert line frequency
Starting at $76.73
Transformer - Hammond, Universal Single Ended
Part No.
Audio Power
Max D.C. Bias
Dimensions (Inches)
A
B
C
D
E
G Mtg.
- Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
- Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
- For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
- Open style with minimum 12" long primary & secondary leads leads.
- All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation.
- Primary impedance range from 2,500 to 10,000 Ohms.
- Secondary impedance range from 4 to 32 Ohms.
Part No.
Audio Power
Max D.C. Bias
Dimensions (Inches)
A
B
C
D
E
G Mtg.
Starting at $61.35
Transformer - Hammond, Low Voltage / Filament, Open, 5 VCT
- Open style, chassis mount transformers with a 115V 60Hz primary and a 5V center tapped secondary.
Starting at $26.35
Transformer - Hammond, Low Voltage / Filament, Open, 42 VCT
Open style, chassis mount transformers with a 115V 60Hz primary and a 42V center tapped secondary.
$58.00
Transformer - Marshall, Output, for JTM45
Special Order Item
Genuine Marshall™ output transformer for JTM45.
$145.95
Out of Stock
Transformer - Hammond, Guitar Amplifier, replacement for Marshall
- Replacements for Marshall amps
- Designed for drop in replacement of original units.
- Physically, parts were designed to look similar to original factory units (where possible).
- Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $128.95
Transformer - Reverb Driver, for Fender® Amps, 125A20B Replacement
Replacement reverb driver transformer for the Fender® part numbers 125A20B, 022921, and 037099. This is the standard reverb driver transformer used in most Fender amps that use a 12AT7 and transformer driven 4AB3C1B tank. Found in countless Fender® models including original and reissues of the following:
- Fender Princeton Reverb
- Fender Deluxe Reverb
- Fender Vibrolux Reverb
- Fender Pro Reverb
- Fender Super Reverb
- Fender Twin Reverb
- Fender Quad Reverb
- Fender Super Six Reverb
- Fender Vibrosonic
- Many others
$13.95
Transformer - Hammond, Toroidal Power, 22V / 44V secondary
Dual 117/234 VAC primary, 50/60 Hz. operation. 44 V series, 22 V parallel secondary.
Starting at $61.85
Transformer - Hammond, Guitar Amplifier, replacement for Fender, 120 V
Warning: Not all amplifier models of the same name use the same transformer model.
- Designed for drop in replacement of original units.
- Physically, parts were designed to look similar to original factory units (where possible).
- Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
- See P-T290-FENDER-120-UP for upgraded 120 V transformers, P-T290-FENDER-240 for 240 V transformers
Warning: Not all amplifier models of the same name use the same transformer model.
Starting at $57.49
Transformer - Hammond, Power, Low voltage, 6.3V/6A
Specifications:
Features:
- Size: 37.8 VA
- Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
- Secondary VAC RMS Series: 6.3V @ 6 A
- Secondary VAC RMS Parallel: 3.15V @ 12 A
Features:
- Primary 117/234 VAC, 50/60 Hz.
- Dual secondaries
- Secondaries can be used as; a center tapped secondary, parallel connected or used individually
- Units are designed for use with all windings engaged.
- Open style.
- Minimum 6" long leads.
- Dual bobbin design - no electrostatic shield required.
- Class B insulation (130 degrees, C) for e
$55.32
Transformer - Hammond, Audio Broadcast Quality, 850A Series
Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. Sealed case and wax potted core internally for stable characteristics and long life. Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.) Insertion loss of apx. 1 db.
$169.28
Transformer - Hammond, Power, Low V Primary / Secondary, 5V/3A
Specifications:
Features:
- Size: 15 VA
- Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
- Secondary VAC RMS Series: 5V @ 3 A
- Secondary VAC RMS Parallel: 2.5V @ 6 A
Features:
- Primary 117/234 VAC, 50/60 Hz.
- Dual secondaries
- Secondaries can be used as; a center tapped secondary, parallel connected or used individually
- Units are designed for use with all windings engaged.
- Open style.
- Minimum 6" long leads.
- Dual bobbin design - no electrostatic shield required.
- Class B insulation (130 degrees, C) for extra p
$41.52
Transformer - Audio Interstage, 10 mA
Equivalent to Stancor A53-C. 1:3 ratio overall. Center tapped secondary may be used for push-pull grids.Specifications Max. Primary Current: 10 mA Impedance Primary to Secondary (Ohms): 10,000 to 90,000
$16.95
Transformer - Hammond, Low Voltage / Filament, Enclosed, 36 VCT
- Primary 115 VAC, 60 Hz.
- Secondary 36 C.T.
- All secondaries center tapped, VAC (RMS)
- Enclosed, 4 hole chassis mount.
- Minimum 6" long leads.
- Dual bobbin design - no electrostatic shield required.
- Class B insulation (130 degrees C).
- Hi-Pot test of 2,000V RMS.
- UL listed (# E50394) & CSA certified (209651).
$49.08
Transformer - Hammond, Low Voltage / Filament, Open, 33 VCT
Open style, chassis mount transformers with a 115V 60Hz primary and a 33V center tapped secondary.
$34.83