You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(19 pages)
P-T144-XTransformer - Hammond, 144 Series, Audio Chassis Mount

Special Order Item

Features:



  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

$18.14
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T166-44Transformer - Hammond, Low Voltage / Filament, Open, 44 VCT

Open style, chassis mount transformers with a 115V 60Hz primary and a 44V center tapped secondary.


Starting at $19.70
Note:
P-T166E44: 6.6
P-T166F44: 11
P-T166G44: 22
are special order items.
Note: some of these items are special order items.
Click to read more
P-T166-120Transformer - Hammond, Low Voltage / Filament, Open, 120 VCT

Open style, chassis mount transformers with a 115V 60Hz primary and a 120V center tapped secondary.


$24.38
Click to read more
P-T166-25Transformer - Hammond, Low Voltage / Filament, Open, 25 VCT

Open style, chassis mount transformers with a 115V 60Hz or 117 50/60Hz primary and a 25V or 25.2V center tapped secondary.


Starting at $10.02
Note:
P-T166D25: 2.5
P-T166A24: 0.63
P-T166E25: 3.75
P-T166J25: 25
P-T166J25B: 25 - 117V primary
P-T166L25: 50
are special order items.
Note: some of these items are special order items.
Click to read more
P-T850-XTransformer - Hammond, Audio Broadcast Quality, 850A Series

Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. Sealed case and wax potted core internally for stable characteristics and long life. Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.) Insertion loss of apx. 1 db.


$120.63
Click to read more
P-T800-XTransformer - Hammond, Audio Broadcast Quality, 800A Series

Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware. Includes wire leads (minimum length of 4"). Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz. Insertion loss of apx. 1 db. Maximum power level +15 dbm. (except 841A, 842A & 844A which are +20 dbm) with specified characteristics, or higher levels with reduced low frequency performance.


$106.28
Click to read more
P-T1750X-YORKVILLETransformer - Hammond, Output, replacement for Yorkville / Traynor
  • Replacements for Yorkville/Traynor Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Starting at $43.43
Click to read more
P-T167X-12D6Transformer - Hammond, Low Voltage / Filament, Enclosed, 12.6 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 12 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).

Starting at $31.22
Click to read more
Transformer - Hammond, Low Voltage / Filament, Enclosed, 10 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 10 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).

$50.28
Click to read more
Transformer - Hammond, 2W Audio Miniature Epoxy Potted
Features:

  • Perfect for audio input, line matching, isolation or output transformer applications.
  • 2 watt (± 1.5 dB, 300 Hz. - 50 kHz.).
  • Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187" length).
  • Power level ratings are maximum at lowest frequency rating
  • Power can be increased slightly at higher frequencies.
  • Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
$27.35
Click to read more

Pages

(19 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes