You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
P-T126BTransformer - Hammond, Tube Driver Interstage

Special Order Item

Audio watts: 4
Impedance: 5k ohms
D.C. Resistance: 178 ohms
Inductance: 44 henries
Rated D.C. Bias Current: 30 mA
Features:
  • Designed for driver use ONLY in single ended tube output amplifiers. These units replace coupling capacitor circuits for improved sound.
  • Closed style with minimum 8" long leads.
  • All models use bifilar wound windings for exceptional coupling and bandwidth.
  • Minimum frequency response 20 Hz. - 20 Khz (± 1db max. ref. 1 Khz.).
  • The core is gapped to support the specified D.C.
$101.38
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T145JTransformer - Hammond, Audio Chassis Mount Driver, 4k primary

Special Order Item

  • Application: Driver
  • Primary Impedance: 4000 ohms
  • Secondary Impedance: 600 ct
  • Primary D.C.: 8 mA
  • Primary D.C. Resistance: 340 ohms
  • Secondary D.C. Resistance: 24 ohms
  • Output: 135 mW
  • Dimensions A: 1.63
  • Dimensions B: 0.88
  • Dimensions C: 0.81
  • Dimensions D: 1.38

Features:
  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
  • Net weight: 0.5 oz.
$21.98
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T145NTransformer - Hammond, Audio Chassis Mount Driver, 10k primary

Special Order Item

  • Application: Driver
  • Primary Impedance: 10000 ohms
  • Secondary Impedance: 2000 ct
  • Primary D.C.: 5 mA
  • Primary D.C. Resistance: 700 ohms
  • Secondary D.C. Resistance: 89 ohms
  • Output: 135 mW
  • Dimensions A: 1.63
  • Dimensions B: 0.88
  • Dimensions C: 0.81
  • Dimensions D: 1.38


Features:



  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz.

$21.98
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T850LATransformer - Hammond, Audio Broadcast Quality

Special Order Item

Output to Line, Matching or Bridging
  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware.
  • Sealed case and wax potted core internally for stable characteristics and long life.
  • Wide frequency response ± 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.)
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance.
  • Distortion is apx. 1.5% @ 20 Hz.
$146.22
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-T119DATransformer - Hammond, Audio Interstage, 12 Watt

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e.


$30.16
Click to read more
P-T124XTransformer - Hammond, Audio Interstage, 5 Watt
  • Designed for general purpose or replacement use in push-pull or phase inverter tube driver circuits.
  • Should not be used for single ended applications. They have no gap for DC bias current present in SE mode.
  • Open style with minimum 5" long primary leads.
  • Minimum frequency response 150 Hz. - 15 Khz (+/- 1db max. ref. 1 Khz.) at full rated power.
  • Core material is Grain Oriented Silicon Steel.

Starting at $38.60
Click to read more
P-T156Transformer - Audio Interstage, 10 mA

Equivalent to Stancor A53-C. 1:3 ratio overall. Center tapped secondary may be used for push-pull grids.Specifications Max. Primary Current: 10 mA Impedance Primary to Secondary (Ohms): 10,000 to 90,000


$16.95
Click to read more
P-T145BTransformer - Hammond, Audio driver, 145B

Special Order Item

Audio TX driver, chassis mount.

  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (± 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
  • Primary: 600 ohms
  • Secondary: 600 ohms
  • Primary D.C.: 18 mA
  • D.C. Resistance (±15%): 30 ohms primary, 38 ohms secondary
  • Output: 200 mW
$21.98
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes