You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(33 pages)
P-C1535XRF Choke - Hammond
Multiple Options Available
Impregnated with a moisture and fungus resistant varnish. 1-1/2" long axial leads. Wound for low distributed capacity by using 3-Pi windings.

Specifications

  • Part #: P-C1535B: P-C1535J
  • Inductance: 2.5 mH, 5% tolerance: 25 mH, 5% tolerance
  • Q (min): 106: 102
  • Test Frequency: 250 KHz: 79 KHz
  • Self Resonant Min. Frequency: 1.3 MHz: 0.33 MHz
  • Maximum DC current Resistance: 9 Ω: 127 Ω
  • Maximum DC Current: 160 mA: 65 mA
  • Coil Diameter: .469": .531"
  • Core Length: .875": .875"
  • Core Material: Ferrite: Ferrite
Starting at $1.28
Click to read more about this product.
P-T290WEXTransformer - Hammond, 240V for Stand Alone Reverb 1963

Replacement for Fender Stand Alone Reverb - 1963 Equivalent to Fender part number 47609 Primary:240 VAC, 50 Hz. Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".


Warning: Not all amplifier models of the same name use the same transformer model.


$40.71
Click to read more about this product.
P-T119DATransformer - Hammond, Audio Interstage, 12 Watt

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e.


$29.94
Click to read more about this product.
P-T125HTransformer - Hammond, Output, 8 W, 10k Primary

Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187


$36.73
Click to read more about this product.
P-T143Transformer - Hammond, Power, 350-0-350V, 70-90 mA
Custom manufactured to replace most 6 and 7 tube sets of the early 1930s. Supplied with vertical mounting shells. Provides a seperate filament winding for audio output stages.
Specifications
Rating: 350-0-350 V, 70 or 90 mA (if 5 V winding is used with 2 A rectifier)
Windings: 5 V, 3 A; 2.5 V, 7.5 A; 2.5 VCT, 3.5 A
Mounting Centers:2 x 2.625"
Weight: 4.2 lbs.
Overall Height: 3.12"
$105.95
Click to read more about this product.
P-T154GFilter Choke - Hammond, Open Bracket, 9 H, 40 mA, 700 ohm
  • Inductance: 9 H
  • D.C. Current: 40 mA
  • Resistance: 700 ohms
  • Maximum Operating Voltage: 300 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$13.36
Click to read more about this product.
P-T154MFilter Choke - Hammond, Open Bracket, 2 H, 100 mA
  • Inductance: 2 H
  • D.C. Current: 10mA
  • Resistance: 175 ohms
  • Maximum Operating Voltage: 300 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$12.71
Click to read more about this product.
Filter Choke - Hammond, Open Bracket, 15 H, 30 mA
  • Inductance: 15 H
  • D.C. Current: 30 mA
  • Resistance: 1026 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$15.96
Click to read more about this product.
Filter Choke - Hammond, Open Bracket, 10 H, 65 mA
  • Inductance: 10 H
  • D.C. Current: 65 mA
  • Resistance: 205 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$24.92
Click to read more about this product.
P-T158TFilter Choke - Hammond, Open Bracket, 1 H, 300 mA
  • Inductance: 1 H
  • D.C. Current: 300 mA
  • Resistance: 40 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$21.63
Click to read more about this product.

Pages

(33 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes