You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(33 pages)
P-T158TFilter Choke - Hammond, Open Bracket, 1 H, 300 mA
  • Inductance: 1 H
  • D.C. Current: 300 mA
  • Resistance: 40 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$21.63
Click to read more about this product.
P-T159SFilter Choke - Hammond, Open Bracket, 4 H, 225 mA
  • Inductance: 4 H
  • D.C. Current: 225 mA
  • Resistance: 65 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$28.06
Click to read more about this product.
Filter Choke - Hammond, Open Bracket, 2.5 H, 300 mA
  • Inductance: 2.5 H
  • D.C. Current: 300 mA
  • Resistance: 43 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$28.11
Click to read more about this product.
Transformer - Hammond, Filament, 6.3 VCT, 10 A, Enclosed

Specifications



  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 10 A
  • Mounting Centers: 2" x 1.69", vertical


Key Features



  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)

$42.45
Click to read more about this product.
P-T125FSETransformer - Hammond, Universal Single Ended, 20 W, 90 mA

Transformer - Hammond, Universal Single Ended, 20 W, 90 mA max DC bias



  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz at full rated power (± 1db max. - ref. 1 Khz).
  • For full frequency response (20 Hz. to 20 Khz.) - see our 1627-1642 series.
  • For push-pull output use, see our 125 series.
  • Open style with minimum 12" long primary & secondary leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.

$84.64
Click to read more about this product.
P-C159VFilter Choke - Hammond, Open Bracket, 1.5 H, 500 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.


Inductance (+/- 15%) 1.5H D.C. Current 500 ma. Resistance (+/- 15%) 27 ohms Maximum Operating Volt (D.C.) 500V


$28.34
Click to read more about this product.
P-C159YFilter Choke - Hammond, Open Bracket, 0.6 H, 750 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.


Inductance (± 15%) 0.6H D.C. Current 750 ma. Resistance (± 15%) 11 ohms Maximum Operating Volt (D.C.) 500V


$28.34
Click to read more about this product.
P-T290FXTransformer - Hammond, 120V for Twin Reverb, Dual Showman, etc.
Replacement for Fender Twin Reverb, Dual Showman, Bassman 100
Equivalent to Fender part number 125P34A & 022756
Primary:120 VAC, 60 Hz.
For 240V version, see P-T290FEX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$111.22
Click to read more about this product.
P-T118944Transformer - Hammond, Radiola III-A Replacement Audio

Developed in response to requests from RCA Radiola III-A collectors. The original transformers are usually found with open" windings due to the fine wire and high turns usedcoupled with age. This is a universal replacement type - it will replace any of the three audio transformers used (1st audio driver2nd audio-phase splitter stage or output transformer)by correctly connectiong the 5 lugs. A pin out and connection diagram is included. The cases from the old transformer will fit this new unit. The terminal board is a duplicate of the original.


$47.91
Click to read more about this product.
P-T155BFilter Choke - Hammond, Open Bracket, 6 mH, 2 A
  • Inductance: 6 mH
  • D.C. Current: 2 A
  • Resistance: 0.3 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.
$15.90
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.

Pages

(33 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes