You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(36 pages)
P-T290KXTransformer - Hammond, for Marshall JCM900-50W
Replacement for Marshall JCM900 - 50 Watt
Primary: 120/240 VAC, 50/60 Hz
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$138.78
$124.90
You save: 10%
Click to read more about this product.
P-T167U6Transformer - Hammond, Filament, 6.3 VCT, 16 A
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 16 A
  • Mounting Centers: 2" x 2.19", vertical
Key Features
  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$45.83
$41.25
You save: 10%
Click to read more about this product.
P-TUBT-3Transformer - One Electron, Output, 3000 to 4/8/16
The UBT-3 from One Electron is the same size and power (15 watts) as the UBT-1, but has a primary impedance suitable for single or paralleled tubes running at B+ voltages of 300 to 400 volts, such as: 2A3, WE 300B, 50, etc.
$109.95
$98.96
You save: 10%
Click to read more about this product.
P-T125CSETransformer - Hammond, Universal Single Ended, 8 W, 60 mA
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
  • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
  • Open style with minimum 12" long primary & secondary leads leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.
$47.69
$42.92
You save: 10%
Click to read more about this product.
P-T1650GTransformer - Hammond, Tube Out, Easy Secondary, 35W 6.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$116.92
$105.23
You save: 10%
Click to read more about this product.
P-T166L6Transformer - Hammond, Filament, 6.3 VCT, 2 A
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 2 A
  • Mounting Centers: 2-3/8", u-bracket
Key Features
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$9.58
$8.62
You save: 10%
Click to read more about this product.
P-T166MSTransformer - Hammond, Filament, 5 VCT, 3 A, Open Style

Specifications



  • Primary: 115 VAC, 60 Hz
  • Secondary: 5 VCT, 3 A
  • Mounting Centers: 2.81", u-bracket


Key Features



  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)

$17.94
$16.15
You save: 10%
Click to read more about this product.
P-T166Q6Transformer - Hammond, Filament, 6.3 VCT, 6 A
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 6 A
  • Mounting Centers: 3-1/8", u-bracket
Key Features
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$26.90
$24.21
You save: 10%
Click to read more about this product.
P-T1750KTransformer - Hammond, Output replacement for Fender, 50W 4kΩ
Replacement for Tweed Bassman, Super Reverb
Equivalent to manufacturer part number #125A9A and #022855
Warning: Not all amplifier models of the same name use the same transformer model.
$75.74
$68.17
You save: 10%
Click to read more about this product.
P-T1650NTransformer - Hammond, Tube Output, Push-Pull, 60W 4.3kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$130.77
$117.69
You save: 10%
Click to read more about this product.

Pages

(36 pages)
Subscribe to RSS - Transformers & Chokes