You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(36 pages)
P-TUBT-1Transformer - One Electron, Output, 1600 to 16/8/4
The UBT-1 from One Electron is a low-impedance single-ended output transformer intended for parallel combinations of tubes running a B+ voltages of 250 to 325 volts, such as: two or three EL34s (triode connected), three 2A3s, two 300Bs, two 6AS7s, etc., as well as single sweep tubes run in 'enhanced-triode' mode, resulting in 10 to 15 watts of output power.
$99.95
Click to read more about this product.
P-T1650FTransformer - Hammond, Tube Output, Push-Pull, 25W 7.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

$104.62
Click to read more about this product.
P-T1627SEATransformer - Hammond, Output, Single-Ended, 30 W, 160ma DC
  • New and improved version, higher power handling, smoother frequency response, easy to use secondary tap.
  • Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.

$152.31
Click to read more about this product.
P-T166M2Transformer - Hammond, Filament, 2.5 VCT, 3 A
  • Primary 115 VAC, 60 Hz
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
Specifications
Rating: 2.5 VCT, 3 A
Mounting Centers: 2-3/8", u-bracket
$14.35
Click to read more about this product.
P-T125ETransformer - Hammond, Universal Push-Pull, 15 W, 80 mA
  • Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits).
  • Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz).
  • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
  • Tables provided with transformer listing 90 pre-calculated impedance ratios.

Dimensions (Inches)
Mounting Hole
Part No.
Audio Watts
Max. D.C.
$40.77
Click to read more about this product.
P-T1650PTransformer - Hammond, Tube Output, Push-Pull, 60W 6.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

$130.77
Click to read more about this product.
P-T125ATransformer - Hammond, Universal Push-Pull, 3 W, 25 mA
  • Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits).
  • Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz).
  • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
  • Tables provided with transformer listing 90 pre-calculated impedance ratios.


Dimensions (Inches) Mounting Hole Part No. Audio Watts Max. D.C.


$35.23
Click to read more about this product.
P-T166L5Transformer - Hammond, Filament, 5 VCT, 2 A
  • Primary 115 VAC, 60 Hz
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)


Specifications Rating: 5 VCT, 2 A Mounting Centers: 2-1/8", u-bracket


$17.94
Click to read more about this product.
P-T1615Transformer - Hammond, Tube Output, Push-Pull, 15W 5kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

$90.77
Click to read more about this product.
P-T166S2Transformer - Hammond, Filament, 2.5 VCT, 10 A
  • Primary 115 VAC, 60 Hz.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).


Specifications Rating: 2.5 VCT, 10 A Mounting Centers: 3-1/8", u-bracket


$21.52
Click to read more about this product.

Pages

(36 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes