You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(36 pages)
P-T1760HTransformer - Hammond, Output upgrade for Fender, 20W 6.6kΩ
Replacement for Deluxe, Deluxe Reverb
Upgraded unit allows for more versatility by added secondary connections that did not exist on the original units.
Equivalent to manufacturer part number #125A1A & #022640
Warning: Not all amplifier models of the same name use the same transformer model.
$39.92
Click to read more about this product.
P-C194GChoke - Hammond, Replacement for Marshall Plexi

Replacement for Marshall Plexi Specifications:



  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

$22.76
Click to read more about this product.
P-C1535XRF Choke - Hammond
Multiple Options Available
Impregnated with a moisture and fungus resistant varnish.
1-½" long axial leads.
Wound for low distributed capacity by using 3-Pi windings.
$1.28
Click to read more about this product.
P-T290WEXTransformer - Hammond, 240V for Stand Alone Reverb 1963

Replacement for Fender Stand Alone Reverb - 1963 Equivalent to Fender part number 47609 Primary:240 VAC, 50 Hz. Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".


Warning: Not all amplifier models of the same name use the same transformer model.


$40.71
Click to read more about this product.
P-C1536XChoke - 0.17 - 250, Heavy Duty Hash Choke
Molded powdered iron core.
1-1/4 long axial leads.
High inductance & high current.
L measured at 1 Khz. Inductance: 250 µH20% tolerance
DC resistance ohms: .17
Self Resonant Frequency (MHz): 1.5
Maximum DC current amps: 2.5
Coil diameter (in): .43
Core Length (in): 1.25
$1.12
Click to read more about this product.
Transformer - Fender®, Power, for '65 Twin Reverb Reissue

Made precisely to the original Fender® specifications. Drop-in replacement for '65 Twin Reverb Reissue. Made in the USA. 120V Primary.


$79.95
On Backorder
Click to read more about this product.
P-T119DATransformer - Hammond, Audio Interstage, 12 Watt

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e.


$29.94
Click to read more about this product.
P-T125HTransformer - Hammond, Output, 8 W, 10k Primary

Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187


$36.73
Click to read more about this product.
P-T143Transformer - Hammond, Power, 350-0-350V, 70-90 mA
Custom manufactured to replace most 6 and 7 tube sets of the early 1930s. Supplied with vertical mounting shells. Provides a seperate filament winding for audio output stages.
Specifications
Rating: 350-0-350 V, 70 or 90 mA (if 5 V winding is used with 2 A rectifier)
Windings: 5 V, 3 A; 2.5 V, 7.5 A; 2.5 VCT, 3.5 A
Mounting Centers:2 x 2.625"
Weight: 4.2 lbs.
Overall Height: 3.12"
$99.95
Click to read more about this product.
P-T154GFilter Choke - Hammond, Open Bracket, 9 H, 40 mA, 700 ohm
  • Inductance: 9 H
  • D.C. Current: 40 mA
  • Resistance: 700 ohms
  • Maximum Operating Voltage: 300 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$13.36
Click to read more about this product.

Pages

(36 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes