You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(38 pages)
Filter Choke - Hammond, Open Bracket, 10 H, 65 mA
  • Inductance: 10 H
  • D.C. Current: 65 mA
  • Resistance: 205 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$24.92
Click to read more
P-T158TFilter Choke - Hammond, Open Bracket, 1 H, 300 mA
  • Inductance: 1 H
  • D.C. Current: 300 mA
  • Resistance: 40 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$21.63
Click to read more
P-T159SFilter Choke - Hammond, Open Bracket, 4 H, 225 mA
  • Inductance: 4 H
  • D.C. Current: 225 mA
  • Resistance: 65 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$28.06
Click to read more
Filter Choke - Hammond, Open Bracket, 2.5 H, 300 mA
  • Inductance: 2.5 H
  • D.C. Current: 300 mA
  • Resistance: 43 ohms
  • Maximum Operating Voltage: 500 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$28.11
Click to read more
Transformer - Hammond, Filament, 6.3 VCT, 10 A, Enclosed

Specifications



  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 10 A
  • Mounting Centers: 2" x 1.69", vertical


Key Features



  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)

$42.45
Click to read more
P-T431Transformer - Audio Interstage, Coil Assembly for P-T156
Coil assembly for P-T156. Use your own iron to preserve mechanical fit. Coil window is 1/2 x ½".
$14.75
Click to read more
P-TN-51XTransformer - Line Isolation, 35 VA
Primary: 115 volt, 60 Hz
Secondary: 115 volt, must be hardwired VA Rating:35
Mounting centers: 3.125U-bracket
Weight: 1.8 lbs.
$21.95
Click to read more
P-T125FSETransformer - Hammond, Universal Single Ended, 20 W, 90 mA

Transformer - Hammond, Universal Single Ended, 20 W, 90 mA max DC bias



  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz at full rated power (± 1db max. - ref. 1 Khz).
  • For full frequency response (20 Hz. to 20 Khz.) - see our 1627-1642 series.
  • For push-pull output use, see our 125 series.
  • Open style with minimum 12" long primary & secondary leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.

$84.64
Click to read more
P-T42TM022Transformer - Audio and Signal

Primary: 1500 ohms center tapped. Secondary: 600 ohms center tapped.


$5.00
Click to read more
P-RC-3Choke - One Electron, Audio, PRC-3, 225H for Preamp Output

The PRC-3 audio choke from One Electron was designed as a plate load for the output of either a high quality line amplifier or a phono preamp.


$69.95
Click to read more

Pages

(38 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes