You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(38 pages)
P-T290FXTransformer - Hammond, 120V for Twin Reverb, Dual Showman, etc.
Replacement for Fender Twin Reverb, Dual Showman, Bassman 100
Equivalent to Fender part number 125P34A & 022756
Primary:120 VAC, 60 Hz.
For 240V version, see P-T290FEX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$111.22
$97.87
You save: 12%
Click to read more
P-T118944Transformer - Hammond, Radiola III-A Replacement Audio

Developed in response to requests from RCA Radiola III-A collectors. The original transformers are usually found with open" windings due to the fine wire and high turns usedcoupled with age. This is a universal replacement type - it will replace any of the three audio transformers used (1st audio driver2nd audio-phase splitter stage or output transformer)by correctly connectiong the 5 lugs. A pin out and connection diagram is included. The cases from the old transformer will fit this new unit. The terminal board is a duplicate of the original.


$47.91
$42.16
You save: 12%
Click to read more
S-H135Form - Ceramic, 2-½" x ½" Diameter, 6-32 Threads
Use as a standoff or coil/choke form.
$0.20
$0.18
You save: 10%
Click to read more
P-TF413160Transformer - Fender, Power, for Deluxe Reverb 120V
Genuine Fender power transformer designed for use in the ‘65 Deluxe Reverb as well as the ‘68 Deluxe. Made to original fender specifications. 120V Primary
$74.95
$65.96
You save: 12%
Click to read more
P-T155BFilter Choke - Hammond, Open Bracket, 6 mH, 2 A
  • Inductance: 6 mH
  • D.C. Current: 2 A
  • Resistance: 0.3 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.
$15.90
$13.99
You save: 12%
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more
P-T1608ATransformer - Hammond, Tube Out, Easy Secondary, 10W 8kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$113.24
$99.65
You save: 12%
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more
P-T1628SEATransformer - Hammond, Output, Single-Ended, 30 W, 5k Primary
  • Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.

$186.84
$164.42
You save: 12%
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more
P-T1640SEATransformer - Hammond, Output, Single-Ended, 30 W
  • Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.
$186.84
$164.42
You save: 12%
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more
P-T1650WTransformer - Hammond, Tube Output, Push-Pull, 280W 1.9kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$415.20
$365.38
You save: 12%
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more
P-T167G120Transformer - Hammond, Filament, 120 VCT, 0.5 A

Specifications



  • Primary: 115 VAC, 60 Hz
  • Secondary: 120 VCT, 0.5 A
  • Mounting Centers: 2" x 1.69", vertical


Key Features



  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)

$24.98
$21.98
You save: 12%
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more

Pages

(38 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes